Monthly Archives: April 2023

Thimble, Mechanism and so on.

  

  PROBLEM, there is another gate to be opened in places where plastic cannot run … this phenomenon is still commit today in Taiwan.

  Sides of mold well is slower than center, which is caused by friend in opposite diary.

  In fact, injecting filling pHase, it can still be subdivided into two parts:

  1. Flow: Plastic Flows Out of Nozzle and is InjeCted Into Cavity Through Main Runner to Runner and Gate.

  

  

  With HOLES; ManPower and Time WASTED BY Intermediation Process is Hard to Estimate! And our hope is to get a good product with a tryout.

  Better Product.

  

  

  If you can res reduce this part of time loss, it will give inCrease Productivity.

  

  COOLING MeChanism is Mainly:

  1. Metal Template Heat Conduction.

  2. ConVection and Very Small Amounts of Radiation Are Scatter Into Atmosphere.

  Wall of Metal Mold During Laminar Flowar Flow and Turburent Flow. As can be seen from left food that mold wall temporary is higher during laminar flow, white is a poor design method.

  The Slowest Speed, Which Also Caues A Large Shrinkage and Warpage of Finished Product.

  

  at anner two corners, it is suitable to add two Small Tubes to the Achieve University Cooling.

  Arrangement of Water Flow has two basic types: Series and Parallel. HowEver Since Flow in Parallel Mode Is Dispersed, Efficience Is Reduced, Series is Generally used.

  For some long and defaas, where water pipe can be processed, pipe or backle (bubbler & buffle) is userd to increase constaling efficience.

  The Latest Coolules take into account detailed mechanisms such as parting Surfaces, Inserts, and Mold Base Sizes.

  BEFORE Applying Cooling Analysis, Some Basic Physical Terms Should Be Understood First:

  ° C, then Calorific Value of Other Substances, Ratio of Other Substances to Water is Called Specific Heat, Which Shows that Energy Required to RAM of Celsius by 1 ℃.

  Heat Capacity CP (Heat CaPacity) [CAL / CM ^ 3 ℃] = Specific Gravity ρ, [g / cm ^ 3] x spiecific head [call / g ℃], this file indicatehead capacity is different, and temporarative is different.

  /℃], Which Indicates Ability of a Material to Conduct Heat. A Substance with A Large Thermal Conductivity Absorbs Heat and DISSIPATES Heat Quickly.

  , Thermal Properties of Water and Plastic, Mold Steel Are:

  RATIO of thermal Diffusivity, Iron and Plastic is about is 0.517/0.0003 = 172, which is 172 Times Different.

  

  1. Region to region: Plane position is different.

  2. Through Thickness: Different Thickness Positions.

  3. Directionality: Parallel/Vertical Molecular Direction

  Factors That Basically Affect Contraction Are:

  1. Free Volume Shrinkage: This is Data from P-V-T Experimental Measurement.

  2. Crystallinity: Material Undergoes Phase Change During Crystallization Process, And Material with High Crystallinity Shrinks More.

  3. MOLD LIMITATATAN: if mold want is free from plastic shrinkage, shrinkage will be small.

  4. Molecular Alignment: Directionality Produted During Flow Process. If Not Released, Will Have Different Shrinkage Vallel to Main Alignment and Vertering OFCICALALALLALLALLALALLORALALARLORALALARARLARAORARARARAARARAARAAAAAAAAAAAAAEAAEAAAAAAAAAAAAAAAAAAAEUAAAAAAAAAAAAAAAAAAAAAAAAE caseAA case case caseAAAA caseAOAAAAAAAAAAAEAsAAEEEAAAAAAAAAAAAAAAAAEAAEEEEEEEEE hisE his his his his case case case case caseEEEE case case case case case case caseEE caseEctctEEE highEEE

  In order to control warpage, we must firstmitnds,

  Main factors that suummarize warping can be divled into three categories:

  

  Varies with Thickness or Location, Depending on Pressure Holding Efficience.

  The Image; If Contraction of Vertical Direction is Greater than Radial Direction, then Bell-Shaped Warp in the Figure Occurs.

  Shrinkage Analysis -Read Flow and Cooling Analysis Results, Match Physical Properties of Material to Calculating FINISHED PRODUCT:

  a. Shrinkage in all directions

  b. Molecular Alignment (Orientation)

  c. Area Shrinkage Rate

  d. Volume shrinkage

  e. Perform univarate analysis

  

  SIMULATE POSSIBLE Warped Shapes

  Diagnose to find cause of warpage ·

  Logical Judgment, Providing Solutions

  Reduce Warpage of Finished Product with Optimal Filling, Pressure Keeping, COOLING and Other Operation Conditions

  Reduce WarPage by Changing Thickness of Material and Reinforcing IT

  Calculated by Different Numerical Solutions (Large Displacement Deformation).

  Then, then

  Bend Analysis: Should Be Judged as Linear or Nonlinear

  Small Displacement Analysis: Calculating Linear Deformation

  Large Displacement thermoplastic Injection Molds Analysis: Calculating Nonlinear Thermoplastic Injection Molds Deformation

Author: IEAT, Thailand Industrial Zone Administration

  

  In the previous article, we introduced to you that Thailand allows private enterprises to invest in industrial parks or industrial real estate. Therefore, in order to distinguish between state-owned industrial parks, industrial parks jointly invested by state and private enterprises, and industrial parks operated by private investors, the Thai government uses different suffix names to define the operating norms of various industrial parks.

  The Industrial Estate industrial park mentioned in the previous articles actually refers to the industrial park that I-EA-T, the Thai Industrial Zone Administration, promises to invest by itself or jointly venture with private companies. In fact, Industrial Zone and Industrial Park are built by private organizations, and the industrial parks approved by other Thai government departments (such as BOI of Thailand Investment Promotion Committee) cannot get the support of I-EA-T of Thailand Industrial Zone Administration.

  Then, besides Industrial Estate, Industrial Zone and Industrial Park, what other types of industrial parks are there in Thailand?

  Today, we will talk about the industrial parks in Thailand with Industrial Land and Industrial Community as the suffix.

  First of all, both Industrial Land and Industrial Community are industrial parks built and operated by private organizations, and they can’t get the support of I-EA-T of Thailand Industrial Zone Administration.

  Industrial Land was approved by the Ministry of Industry of Thailand and Industrial Community was approved by the Department of Industrial Works of Thailand.

  If private investors want to apply for the construction of Industrial Land type industrial parks, they need to apply to the Provincial Industry Office, the provincial natural resources and environment office and the Provincial Land Office.

  If private investors want to apply for the establishment of an Industrial Land type industrial park, they only need to apply to the Department of Industrial Works of Thailand.

  Investors who want to settle in Industrial Land and Industrial Community type industrial parks need to abide by the provisions of the the Factory Act B.E. 2535, but investors are not allowed to apply for various investor benefits (such as 100% foreign ownership, permanent land holding, etc.) from the Thai Industrial Zone Administration I-EA-T. The charging standards of public facilities in the park are also determined by the industrial park owners themselves and provide maintenance services.

  Disclaimer: The market is risky, so you should be careful when choosing! This article is for reference only, not as a basis for trading.

  Key words:

I Receive Many Questions on How TO IMPROVE HIGH-SPEED Progressive Die Hits Per Service, Otherwise Known As Tooling Life. How can I get more parts pervice? How can I run toling

  

  

  If your tool design is lacking, investing in coatings will be throwing good money after.

  increased vibration.

  Guide Pins and Ball Cages that are too small for the application. Again, they Will Flex, Causion Vibration During Cutting and Forming, Which Will Lead to premature deploy.

  And bottom with just the right amount of lube. TOO MUCH can be as bad as too little.

  

  To Figure Out What is Going On. If you get 100,000 hits pervice today and only 50,000 hits per service tomerrow, too coatings will not help you.

  Back and Forth to the Coater Would Bring us Little Benefit -We Might Gain Another Week of Run Time.

  But for some expected applications, when we are forming and excitement missing, the Stampings Would n’t rubout couatings.

  

  

  About 3,500 on the vicker scale (compared to 1,800 for carbide).

  

In recent years, water pollution has become increasingly serious, and heavy metal pollution has become a concern of more and more consumers. For the safety of drinking water for your family, you will not hesitate to install a reverse osmosis water purifier. When you use the water purifier daily, do you have the following situations: 500) this. width = 500′ align =’ center’ hspace = 10vspace = 10Rel =’ nofollow’/> When making milk powder for your baby, when making a cup of green tea, or when you just want to drink a cup of hot water, you need to go through the process of receiving water, boiling water, and waiting for the boiling water to drop to a proper level. At this time, it would be nice if there is a machine that can directly produce hot water and has a variety of temperatures to choose from, so that you can drink clean water at your desired temperature at any time.

  

  A.O. Smith innovatively developed a water purifier that can directly produce hot water, so there is no need to wait for hot water to be purified.

  On March 8, 2018, China Household Appliances and Consumer Electronics Expo (AWE) was grandly opened in Shanghai New International New International Expo Center. As an important exhibitor of this Expo, A.O. Smith’s innovative products made their debut. Among them, this water purifier that can directly produce hot water — — A.O. Smith’s water purification hot drink machine, once unveiled, triggered people inside and outside the industry to stop and understand and find out. This water purification hot drink machine is used with A.O. Smith reverse osmosis water purifier, with a unique patented touch multi-temperature faucet, and hot water with three different temperatures and normal temperature water can be switched at will; Get rid of the long wait for making tea and making milk. 500) this. width = 500′ align =’ center’ hspace = 10vspace = 10Rel =’ nofollow’/> Many patented technologies, reliable and convenient user experience. It is also equipped with a patented zero-steam heating system to avoid burns caused by steam overflowing from the faucet. Child lock function prevents accidental burns caused by children’s misoperation; Food grade 304 stainless steel vacuum insulation liner, safe and energy-saving; One-click emptying old water function, enjoy fresh and clean hot water without worry; The display screen of the fuselage rises 15 degrees, which is convenient to know the running state of the machine in the cabinet when standing.

  Deciphering the century-old master A.O. Smith, innovative technology is trustworthy.

  In 1874, A.O. Smith Company was established in Wisconsin, USA. It has a history of 144 years, and it is listed on the new york Stock Exchange (AOS). At present, A.O. Smith’s market value has exceeded $10 billion, and it has been successfully selected as a member of the Standard & Poor’s 500 and among the "American Famous Enterprise Clubs". The innovative idea of "finding a better way through research" has always been the core idea implemented by A.O. Smith. It is precisely because of the persistent pursuit of innovation that A.O. Smith has developed more than 100 patented black technologies, leading technological changes in the industry and being unanimously recognized by the industry. In the future, we will persist in technological innovation to effectively protect consumers’ drinking water safety. 500)this.width=500′ align=’center’ hspace=10 vspace=10 rel=’nofollow’/>

There are many manufacturers to choose from. What sets mfg apart is a depth and bladth of capability that is driven by a singular on fRP composites.

  

  R & D.

  No Other Composites SUPPLIER BRINGS Comparable Know-How and ManuFacturing Capacity. Take a look-And Let ’s Start a discussion on how we might server.

  Class Quality and Management Practices have mfg an trusted SMC Molding Supply partner to leading companies.

SMC Molding

Robert S. Morrison, Founder

To say which country’s people are the most confident, it must be the British. After all, in their view, the British are the spokesmen of nobility and gentlemen.

  

  Even when they speak English, they think British English sounds more correct and beautiful, while American English … that’s a mistake …

  However, apart from the little pride in accent, the British think they are much better than the Americans. Let’s see how narcissistic these British people are on Reddit.

  English

  British netizens said that we British people are the most realistic, and the words used when we speak are very appropriate.

  Look at this hamburger. Americans like to call it hamburger, which is not kind. Excuse me, where is ham?

  A Burger without ham. Why do you Americans call it hamburger?

  Or we British are sincere, we just call it Beef Burger, beef burgers are made of beef, and fresh ingredients can be seen!

  If you don’t call food well, you can’t even call sports well.

  Football is obviously kicked with the feet, so we British people call it football. Do you know how to play it at a glance?

  But what is your American football? -football! I still play with my hands, which … is a magical logic …

  When we really call football, Americans come up with a soccer. Why do you think this is necessary?

  It’s better to call it English. football is football and rugby is Rugby.

  humanize

  Americans’ life is not as detailed as ours in Britain, which can be seen from a small socket.

  American sockets look like this. Apart from being cute and cute, there is nothing special about them.

  But we British people are different. The British people are striving for perfection in the socket. In order to better ensure the safety of electricity use, we have specially installed a separate switch in the socket.

  You can turn off this switch when you are not using the socket. Is it safe and energy-saving?

  Let’s talk about this date again. In many Asian countries, people use year, month and day, which are expressed in descending order, such as 2019/03/22.

  Although we don’t express it this way in Britain, we express it in order from small to large, day, month, year, 22/03/2019.

  At this point, Americans are wonderful again, and they have to make the date format of next month, day and year. March 22, 2019 has to be written as 03/22/2019.

  American friends, you are really fighting to be different, which is easy to cause misunderstanding in the international community, you know?

  health

  Although Europeans and Americans are fatter than Asians, Americans don’t seem to care about their bodies at all.

  I’m too fat to get on the plane, and I have to keep eating …

  At this point, we British people are doing very well. Although we are fat, we are trying to find a way. In order to help people reduce their calorie intake, we will start to levy suger tax and increase taxes on diets with high sugar content, such as Coca-Cola.

  The price is expensive. If you don’t buy it, you can always reduce obesity.

  Of course, weight loss should also start with dolls. In February this year, fast food advertisements were banned in public places such as buses, subways and taxis in London, England.

  And what about your American children? Still feasting on this junk food.

  holiday

  I heard that you Americans have 20 days of paid vacation a year, right? Do you think it’s a lot?

  As a cultured British, we only put data and don’t comment.

  In Britain, we have 28 days of paid annual leave every year. Oh, yes, that’s not counting maternity leave and sick leave.

  Okay, we’re done.

  Well … this show off … many domestic friends are envious! ! ! Not to mention 28 days in Britain, American holidays are very enviable! !

  humanistic connotation 

  Let’s talk about something meaningful. We British people are very good at building castles.

  Windsor Castle

  Edinburgh Castle

  stirling castle

  Not to mention the atmosphere and beauty, there are countless historical stories and legends hidden here.

  Look at America again. Do you have such a magnificent castle? Disney Castle? ?

  In addition to castles, there are many great writers in English culture. In the long run, we have Shakespeare, Dickens and Bernard Shaw …

  Closer to home, you know all about Harry Potter, and J·K· Rowling is no stranger.

  Each one carries considerable weight, but the United States is a country with a relatively short history after all, and it is certainly not as good as our Britain in the accumulation of cultural heritage.

  safe

  Of course, the most important thing is that we British people are definitely doing much better than Americans in gun control!

  Look at the news in the United States. The shooting here today and the shooting there tomorrow make people panic.

  In Britain, our control over guns is very strict. Not every casual resident can buy a gun and keep it at home.

  Moreover, we not only control guns, but also control knives. It is forbidden for teenagers under 18 to buy knives.

  Therefore, our public security environment is more reassuring than that of the American imperialists.

  Ok, ok, netizens in Britain, you are gone with the wind again … Do you agree with this kind of anxiety of the people of the corrupt country?

  —END—

What you’ll learn:

  

  An overload or short circuit in a fuse or mini city breaker can lead to Undersupply or Failure of an Entire 24-V dc Power-SUPPLY SYSTEM.

Selectivity Protection using an electronic fuse offers a better propective option in mission-classSSSSS and Applications.

USING Selectivity Protection to Implement NEC Class 2 Control Circuits Requires Just One Large Power Supply Rather than Resorting to Multiple SUPPLIES.

  

  

  Of Plants Adopting and Implementing the Advanced Electrification, Automation, and Digitalization Concepts of Industry 4.0.

  Shortcomings of Fuses and Miniature Circuit Breakers

  V Power-supply system. This can down down connected propuction systems, with impacts on a problem, quality, cycle times, and deliver commitments to this.

  When configuring miniature circuit breakers.

  be critical.

  Selective Electronic Circuit Protection with FAULT DETECTION

  

  Then, then

  Selectivity Modules Were Designed Specifically with Power Supplies in Mind.

  

  Flexible InRush Current Management During Circuit Load Switch-ONS

  

  Then, then

  In load-dependent sequential connection delays, the next output will be connected as the current of the previous output is les less (fig. 2, agin).

  Use Case: NEC Class 2 for Apps Requiring Control Circuits with Limited Energy

  

   <100 W rated for each load circuit, these can now be substituted with a single large power supply rated >AS A Result, This Leads to Fewer Components, Less Complexity, Less Wiring Time, and PossiBly A Smaller Control Panel Enclosure, All of Which Can Lead to Potential Cost Saves (FEAG.

  Other Circuits Continue to be support the interruption. Even PLCS, Which Can only Bridge Power Failures for a Few Milliseconds, Continue to run through problems.

  Of settings and Diagnostics Possible, Including Those for the NEC Class 2 Outputs.

  Fast, SIMPLIFIED, and Channel-Specific Diagnostics and Circuit Visibility

  Programming frameworks.

  BecauSe only one digital input of the PLC is required.

  Summary

  And miniature circuit breakrs to protrical circuits.

  Circuit Protection Technology with FAST-FAULT Detection.

bank of issue

  

  China Minsheng Banking Corporation

  Subscription currency

  Renminbi (RMB)

  Incremental unit

  10,000 yuan

  Issue date

  2016-10-09

  Starting from income

  2016-11-09

  date due

  2016-12-09

  Income acquisition mode

  Non-guaranteed

  target

  Money market, others

  Distribution area

  whole country

  product category

  Rmb financial management

  Statement of yield

  Expected annualized rate of return: 3.00%

  Investment scope

  Capital investment and portfolio arrangement: 0-80% of cash, various deposits and certificates of deposit; 0-80% of all kinds of public offerings, private placement bond and other fixed-income assets that meet regulatory requirements, bank, commercial paper and other bill assets circulating between banks and exchanges; 0-50% of (graded) asset management products or product portfolios issued by financial institutions and other assets that meet regulatory requirements. The above investment ratio can fluctuate within the range of [0, +10%]. According to the market situation, banks should adjust the above-mentioned investment scope, investment varieties, investment ratio or floating range, and should disclose information in advance before making adjustments.

  Early termination condition

  The bank has the right to terminate this wealth management product in advance depending on the operation of the product, and the early termination date is the date when the bank terminates this wealth management product according to the contract.

  Raising planning conditions

  The lower limit of raising scale is 100 million

  Subscription conditions

  Product structure This wealth management product is a regular and open wealth management product. During the duration of wealth management products, customers can apply for agreed purchase before each open day, and purchase the wealth management products in the next closed period on the open day. Customers who hold the share of this wealth management product can apply for agreed redemption before each open day, and redeem all or part of the share of the wealth management product in the previous closed period on the open day. Banks have the right to accept or reject the agreed purchase/agreed redemption application put forward by customers on the open day. If the customer has not agreed to redeem all the wealth management product shares, the wealth management principal corresponding to the customer’s remaining wealth management product shares will automatically enter the next closed period to participate in the investment. V. Agreed purchase/agreed redemption of wealth management products (I) After the establishment of this wealth management product, customers can handle the agreed purchase/agreed redemption of this wealth management product at bank outlets (working hours of outlets, the same below) or through electronic channels or other sales channels recognized by regulatory agencies. (2) After the customer holds the share of this wealth management product, he can apply for agreed redemption at the bank’s business outlets or electronic channels or other sales channels recognized by the regulatory authorities before the opening day, and redeem all or part of the share of the wealth management product in the previous closed period on the opening day. The share of various products agreed by customers after redemption should be greater than the minimum holding share of such products agreed in Article 1 of this product manual, otherwise the customers must redeem them in full. After the agreed redemption is confirmed by the bank on the open day, the wealth management principal and wealth management income corresponding to the agreed redemption of wealth management products will be returned to the customer. (3) When the customer agrees to purchase/redeem this wealth management product through the banking outlets, it is required to submit an application for wealth management business for agreed purchase/agreed redemption. (4) When the customer agrees to purchase/redeem this wealth management product through electronic channels, he/she shall make the agreed purchase/agreed redemption in the corresponding trading interface. (5) Before the final confirmation by the bank, the customer’s agreed purchase/agreed redemption application can be revoked; After the bank finally confirms it, it is not allowed to cancel it. After the final confirmation of the bank, the customer’s agreed purchase/agreed redemption application cannot be revoked. (6) The customer’s financial principal and financial income shall be transferred back to the customer’s trading account within two working days from the opening day. (7) If the customer has not agreed to redeem all the wealth management product shares before the open day, the wealth management principal corresponding to the customer’s remaining wealth management product shares will automatically enter the next closed period to participate in the investment, and the expected rate of return in this closed period will be re-announced by the bank. (VII) Please refer to the customer’s rights and interests notice for details about the customer’s agreed redemption process.

Various Markets to Provideo An Easy-to-Understand, Dynamic, and Objective Analysis of the Relevant Market to Intertholders.

  

  Get Free Sample Report: Water Polo Equipments Market Research Report 2023-2031

  

  Water Polo Equipments Market Research Report 2023-2031 Market: Key Features

  Get discount: Water Polo Equipments Market Research Report 2023-2031

  AS a Whole, and the particular competitors faced are also dudied in the large-scale market.

  Leading Global Water Polo Equipments Market Research Report 2023-2031 Market Players And Manufactures Are Studied to Give A Brief Idea About Competitions.

  

  Senior Management, and Key Players in Water Polo Equipments Market Research Report 2023-2031 Industry.

  Market Dynamics of Water Polo Equipments Market Research Report 2023-2031 Market

  at a Much Higher Level than an reasoning study.

  Table of Content: Global Water Polo Equipments Market Research Report 2023-2031 Market Research Report

  Chapter 1: Global Water Polo Equipments Market Research Report 2023-2031 Industry Overview

  Chapter 2: Global Economic Impact on Water Polo Equipments Market Research Report 2023-2031 Market

  Chapter 3: Global Market Size Competition by Industry Producers

  Chapter 4: Global Productions, Revenue (Value), According To Regions

  Chapter 5: Global Supplies (Production), Consumption, Export, Import, Geographically

  Chapter 6: Global Productions, Revenue (Value), Price Trend, Product Type

  Chapter 7: Global Market Analysis, on the Basis of Application

  Chapter 8: Water Polo Equipments Market Research Report 2023-2031 Market Industry Value Chain

  Chapter 9: Water Polo Equipments Market Research Report 2023-2031 Market Chain, Source Strategy, and DOWNSTREAM Buyers

  Chapter 10: Strategies and Key Policies by Distributors/SUPPLIERS/Traders

  Chapter 11: Key Economic Indicators, by Market Vendors

  Chapter 12: Market Effect Factors Analysis

  Chapter 13: Global Water Polo Equipments Market Research Report 2023-2031 Market Forecast Period

  Chapter 14: Future of the Market

  Chapter 15: Appendix

  Global Water Polo Equipments Market Research Report 2023-2031 Market: Regional Analysis

  Different Factors that aid the market grewth.

  North America (United States, Canada and Mexico)

  Europ (Germany, UK, France, italy, Russia and Turkey Etc.)

  ASIA-PACIFIC (China, JAPAN, KOREA, India, Australia, Indonesia, Thailand, Philippines, Malaysia and Vietnam)

  South America (Brazil ETC.)

  Middle East and Africa (Egypt and GCC Countries)

  

  Brand for in 2028? Which region has more oppointunities?

  Thanks for reading this article; you can also get indicty chapter wise section or region wise report version like north American.

  Buy Now Full Report: Water Polo Equipments Market Research Report 2023-2031

  Market segmentation:

  Market by Type

  Water Polo Ball

  Water Polo Clothing

  Others

  Market by Application

  Competition

  Amusement

  Key Players Included in this report are:

  Nike

  Adidas

  Mikasa

  Tyr

  Baden

  Billabong

  Kap7

  Speedo Molded Ciz Circuit Breaker Brand International

  Turbo

  Under Armor

Original TheLancet The Lancet The Lancet

  

  The The Lancet recently released "Series on Heat and Health". The author suggests that global coordinated action should be taken immediately to slow down climate change and enhance the ability to resist extreme high temperature, so as to limit further temperature rise, avoid permanent and severe extreme high temperature around the world, protect the most vulnerable people and save lives. Effective and environmentally sustainable cooling measures can avoid the most serious impact on health. Many high-temperature-related deaths can be prevented by slowing climate change and reducing exposure to extreme high temperatures.

  The impact of extreme high temperature on health is increasing, and the number of deaths is increasing. As the global temperature continues to rise, these effects are expected to continue to deteriorate.

  Mitigating climate change is necessary to prevent the temperature from rising further.

  Even if the existing climate change mitigation policies are implemented, the global temperature will continue to rise, and it is urgent to improve the environmental sustainability of personal behavior and built environment to adapt to the increasingly hot world.

  Extreme high temperature is becoming more and more common all over the world, and the deaths and diseases related to high temperature are expected to increase. The The Lancet recently released a Series on Heat and Health, which includes two articles. The author suggests that global coordinated action should be taken immediately to slow down climate change and enhance the ability to resist extreme high temperature, so as to limit further temperature rise, avoid permanent and severe extreme high temperature around the world, protect the most vulnerable people and save lives.

  The author of the album article calls for the global warming to be controlled within the target of 1.5℃ consistent with the Paris Agreement, so as to avoid a large number of deaths related to high temperature in the future. It is urgent to reduce the impact of extreme high temperature on health, which should include immediate changes in infrastructure, urban environment and personal behavior to avoid high temperature-related deaths. The album was released before the 26th United Nations Climate Change Conference in Glasgow, England.

  Effective and environmentally sustainable cooling measures can avoid the most serious impact on health. These measures include increasing urban greening, adopting wall coatings that can reflect the heat of buildings, and widely using electric fans and other available personal cooling techniques. Thermophysiologists have proved that these techniques can help people regulate their body temperature without aggravating other types of physiological stress. Although air conditioning is becoming more and more common all over the world, many vulnerable groups can’t afford it, and its economic and environmental costs are high, and many people can’t resist the extreme high temperature during the power outage.

  Professor Kristie Ebi from the University of Washington, USA, the co-author of the album, said: "We need to take two strategic approaches in fighting extreme heat. One is to slow down climate change, so as to reduce carbon emissions and reverse the further warming of the earth. The second is to determine timely and effective prevention and response measures, especially for areas with scarce resources. It is estimated that by the end of this century, more than half of the world’s population will face dangerous high temperatures for several weeks every year, and we need to find sustainable and effective ways to cool people down. " [2]

  She added: "If we can’t reduce greenhouse gas emissions and formulate and deploy evidence-based heat action plans, it means that many people and communities in the world will face a completely different future. Normal summer activities, such as outdoor exercise and outdoor work, may face great challenges, because climate warming means that people will be exposed to unbearable high temperatures more frequently, and this challenge will be even greater in the tropics. " [2]

  Health risks of extreme high temperature

  In the same period, The The Lancet published the latest Global Burden of Disease (GBD) model simulation study, pointing out that in 2019, more than 356,000 deaths were related to high temperature, and it is predicted that this number will increase as global temperature rises. However, the author of the album article points out that many high-temperature-related deaths can be prevented by slowing down climate change and reducing exposure to extreme high temperatures.

  When exposed to extreme high temperature stress, the body’s ability to regulate internal temperature may be overwhelmed, leading to heat stroke. In addition, the physiological thermoregulation reaction to maintain body temperature will trigger other types of physiological stress and may lead to cardiopulmonary function events (see Paper 1 and Figure 1). The influence of extreme high temperature is also related to the following situations, such as the increase of hospitalization and emergency treatment, the increase of deaths due to heart and lung diseases and other diseases, mental health problems, adverse pregnancy and delivery outcomes, and the increase of medical expenses. The elderly and other vulnerable groups who may find it difficult to take care of themselves in extreme heat (such as home isolators and people with mobility difficulties) are more likely to suffer from the health effects of extreme heat.

  Extreme heat will also reduce the productivity of workers, especially the billions of workers who are often exposed to high temperatures. These workers often report that high temperature stress leads to reduced work output, and many of them are manual workers, who can’t rest or take other measures to reduce the impact of high temperature exposure.

  Finally, rising temperatures are aggravating other environmental challenges, including ozone pollution, forest fires, and the rapid growth of urban population.

  Professor Ebi said: "If the current greenhouse gas emissions continue to increase, extreme high temperature weather or high temperature heat waves that only appear once every 20 years will appear more frequently in the future; By the end of this century, it may even happen every year. Rising temperatures and an increasing number of elderly people mean that more people will face health risks related to high temperatures. " [2]

  Effective cooling strategies now and in the future

  In order to cope with the above health effects, the author emphasizes the effective cooling strategies that can be taken at the personal, architectural, urban and landscape levels. They also suggested taking measures according to local conditions for specific situations, including nursing homes, densely populated urban areas, workplaces, schools, mass gatherings, refugee camps and sports venues, where people may be particularly vulnerable to extreme heat.

  The author emphasizes that individuals can take some measures to cool themselves and reduce other types of physiological stress caused by regulating body temperature, so as to cope with the health risks brought by extreme high temperature. These measures include using electric fans and spray fans, wetting yourself with spray or water-soaked sponges, wearing wet clothes, and soaking your feet in cold water. There are also some simple but effective and environment-friendly strategies, such as temporarily stopping physical activity, keeping enough water (drinking cold water or hot water), and changing clothes or protective equipment to improve ventilation (see infographic).

  The co-author of this study, Professor Ollie Jay from the University of Sydney, Australia, said: "The effects of extreme high temperature exposure on the body are an obvious and increasingly serious global health problem. If we think more about how to use innovative methods to cool our bodies instead of trying our best to cool the surrounding air, then we will have many sustainable and accessible options to mitigate the effects of high temperature exposure. " [2]

  In addition to personal methods to reduce physiological high temperature pressure, adaptive adjustment of buildings can also help cool the indoor environment. These measures include the use of external coatings that can reflect heat from buildings and environmentally friendly walls to reduce surface temperature, improved insulation materials and glass windows, and better ventilation conditions in and around buildings. The characteristics of urban environment and surrounding landscape will also affect the situation of built-up areas. Lakes, large lawns and parks, outdoor shading areas and reducing pollution in cities are all very important.

  In order to protect people’s health, the high temperature action plan needs not only early warning system, strong supervision and monitoring system, but also evidence-based cooling strategy.

  Professor Jay said: "It is very important that the personal cooling strategy we recommend in the high temperature health action plan must be based on scientific evidence. After all, just making a plan is not enough; The content of the plan itself must be correct. The cooling strategies recommended in some existing high-temperature health action plans seem to come from traditional views. For example, these plans usually recommend avoiding sugary drinks and high-protein foods, and do not recommend using fans; However, research shows that using fans and other strategies (for example, wetting your body with water or wearing wet clothes) at higher temperatures is an effective cooling measure. Establishing an early warning system for extreme high temperature events, including evidence-based measures to protect vulnerable groups, and raising people’s awareness of the health risks caused by high temperature are the key to reducing the deterioration of health and death caused by current and future high temperature events. " [2]

  Professor Jay added: "Under the influence of human activities, most of the population on the earth will inevitably face a greater risk of extreme high temperature in the future than now. Predictive research shows that with the increasing impact of climate change, if our society wants to survive and prosper in the future world with higher temperature, it must immediately deepen the research on the risk of extreme high temperature and increase the investment in corresponding measures. " [2]

  The editorial of The Lancet published in the same period wrote: "[…] Action Plan provides measures to adapt to extreme high temperature, but it does not solve the root cause of extreme high temperature-greenhouse gas emissions. Only by preventing and adapting to the changing climate can we minimize the impact of temperature on health … But we are also faced with a dangerous situation, that is, the commitment to deal with the climate crisis will not be reflected in decisive actions and effective policies. [COP26] The leaders of the conference must provide a transformative regulatory framework, policies and inputs to ensure the sustainability of climate change mitigation and adaptation measures. The article published in The Lancet provides a strong scientific argument that the impact of high temperature on health cannot be ignored. "

  Extreme temperatures are rising.

  As mentioned in previous research reports, both high temperature and low temperature will lead to an increase in the number of deaths and poor health. The new global burden of disease study estimates that 356,000 people died from high temperatures. In addition, researchers estimate that 1.3 million deaths in 2019 were related to cold. This study links non-optimal temperature-related deaths with 17 specific disease causes, and emphasizes its correlation with the mortality of cardiopulmonary and metabolic diseases, as well as the correlation with external causes of death, such as interpersonal violence, self-harm, drowning and injury [3].

  In most places, low temperature causes more deaths than high temperature. Since 1990, the number of cold-related deaths has increased by 31%. In contrast, the deaths attributable to high temperature increased by 74% during the study period, indicating that the mortality rate of extreme high temperature is rising, especially in the hotter regions of the world. The author points out that the study only uses the mortality data of nine countries, so the global estimation results may underestimate the impact of extreme temperature on areas with high temperature sensitivity and overestimate its impact on areas with low temperature sensitivity. In addition, this study lacks data on specific cause mortality in Europe, South Asia and Southeast Asia, and only includes data from one sub-Saharan African country.

  Dr Katrin Burkart, a co-author of the study from the Institute of Health Indicators and Evaluation (IHME) of the University of Washington, said: "Where people live has a great influence on their risk of being exposed to extreme high or low temperature weather respectively. In most areas, low temperature has a greater impact on health. However, our analysis found that in some very hot places, such as South Asia, the Middle East and many parts of Africa, the harmful effects of extreme high temperature may far exceed the harm caused by cold. This is very worrying because the risk of exposure to high temperatures seems to have been steadily increasing in recent decades. " [2] END

  NOTES TO EDITORS

  The modelling study was funded by the Bill & Melinda Gates Foundation. It was conducted by researchers from the University of Washington, USA, University of British Columbia, Canada, and the Chinese Center for Disease Control and Prevention.

  The Heat and Health Series was supported by funding from the University of Sydney, National Health and Medical Research Council, and New South Wales Government Department of Planning, Industry and Environment Climate Change, Australia. It was conducted by researchers from the University of Washington and Arizona State University, USA, Monash University, University of New South Wales, University of Sydney, and The Children’s Hospital at Westmead, Australia, University of Waterloo, Canada, University of Tsukuba, Japan, Loughborough University and London School of Hygiene and Tropical Medicine, UK, Shandong University, China, University of Copenhagen, Denmark, and ETH Zurich, Switzerland.

  [1] The Paris Agreement: https://unfccc.int/process-and-meetings/the-paris-agreement/the-paris-agreement

  [2] Quote direct from author and cannot be found in the text of the Article.

  [3] The study uses data from 64.9 million deaths across nine countries (Brazil, Chile, China, Colombia, Guatemala, Mexico, New Zealand, South Africa, and the USA), which spans 29% of the global population as well as approximately 95% of the inhabited global temperature range, and 79% of sociodemographic conditions. It identifies 17 causes of death related to both high and low temperatures ischaemic heart disease, stroke, hypertensive heart disease, cardiomyopathy and myocarditis, diabetes, chronic kidney disease, lower respiratory infection, chronic obstructive pulmonary disease (COPD), homicide, suicide, drowning, mechanical injuries, animal-, disaster-, road- and other transport-related injuries. The second part of the study extrapolates these data to provide global estimates.

  Title map copyright gent shkullaku/contributor/Getty images

  Chinese translation is for reference only, and all contents are subject to the English original.

  Read the original text