Painting and coating lines.

　　Europe, The Technolog is Commonly Referred to As VarioTherm, a widly user is a registered track of hofmann innovation group in Germany.)

　　TODAY, Hot/Cold Molding is Gaining Rapid Acceptance in Automotive Interior Applications and Many OTHER CONSUMER-GOODS Application High Surface Aesthetical.

　　Choices among Heating Media

　　

　　

　　Images of Hot/Cold Molded Parts).

　　Must be attached for a given polymer in order to realize the benefits of hot/cold molding.

　　Option 1: Hot Water

　　

　　

　　

　　AMORPHOUS MIATERIALS, as well as for molding applications with shopping cycle times or that involve foaming.

　　Option 2: Hot Oil

　　is necessary.

　　-Based Solution Should Be Considered Only for Very High-Temperature Resins and WHERE OTHER TechNOLOT DELIVER the Desired Benefits.

　　Option 3: Steam

　　Requires a Boiler to Produce The Steam (See Fig. 3).

　　

　　Option 4: Induction Heating

　　(> 200 c, 400 f).

　　Their integrating into the back size of the injecting takeout robot. Alternatively, the coils can be mounteding action, 5, 5,

　　Then, then

　　Implementing the Technology

　　And Weld Lines and IMPROVING Flow for Hard-to-Fill Parts.

　　

　　Cavity. Conformal Heating and Cooling Alow for A Very Uniform Cavity Tempeature Across the PART and for FASTER COOLING BeERELIE is Typically Less Heat To Remove.

　　IntRoductions of high-thermal-conductivity mold coatings and materials have further enhanced the possibilities and efficiencies of the hot/cold molding process.

　　Transfer Technology that can achieve the molded cases fastedst public molded cases cycle time.