have an influence on Stamping Outcomes. This Includes this that are extended to be realized during physical tryout and product.
Process. Die Operational Lineup, Binder and Pad Tonnaters, Location of Cushion Pins and Nitrogen Cylinders, and TONNAGE Over Stroke Need to DEFDEDEDED TODEDED TDDENDED TSIGEDEDED TDESGEDEDED TDESGEDEDEDEDEDED TDESGEDEDED TDESGEDEDEDED TDESGEDEDEDED TDEDEDED TDEDEDEDED TDEDED TDEDED TDEDEDED TDEDED TDEDED TDENDED TSIGDEDED TODEDED TSIGED TSIGEDEELATTETIAE andEEIDE’sN onizana’s’s’s’s’s’s’s’s’s’s’s
Commonly Applied Assumping in Simulation that Material Behaves the Same Under Tension and Compression Will Lead to Incorrect and UNRELICTINS (See Figure 2).
More widly in the near future.
Now are available to take the factors insto account to repress form more account (See Figure 3). This Capability Adds Reliability to Simulating Outcomes.
LOST BeCAUSE of Elastic Relaxation, and The Panel Shrinks. The Shrunken Draw Panel No Longer Fits on the Nominal Trim Die.
This scaling process needs to be correctly represented in size.
Validated in Simulation.
Blank Development, Trim Line Optimization. This is Important to Accomplish BeFore Even Reviewback Outcomes, as Changes to Any Lines Will Result In Changer
The Panel.
in super identification.
The observation Flattening (See Figure 6).
, DID Reduce Springback Considerably and Stabilized the Panel Against Twisting (See Figure 7); The Panel Was in a Much Better Start From WHICH TO Attatempt.
If this variation is wide, spanning severter millimeters in terms of springback, compleining cannoted to be successful (See Figure 8).
WERE Not Applied.
Success of compensation.
State-The-The Art Simulation Technology is Capable of these Assessments, as Well as of Diagnostics and What-If Studies to Improve Repeature Outcomes.
The "IMPROVD and Mitigated" proces, with its smaller springback amounts and good rePEataBility, was selected to execute completion.
Compensation was itary times to arrive at a diansionally compliant outcome (See Figure 11).
Surfaces for machining.
Is the Potential of Process Outcomes to Meet Specifications in a Reperation Fashion (See Figure 12).
Worst Case, Concessions on Specification Limits.