Gets the force it need from a presse. The part product by stamping the sheet metween the diswine in the present is calld the pipce part.

　　Though Die Types Are Many, They Can Be Broken Into Basic Types -Cutting and Forming.

　　Cutting Dies. Cutting is Perhaps the Most Common Operation A Stamping Die Performs. Cutting Operations are Blanking, Shearing, Trimming, PierCing, and Notching.

　　Shear, and a portion of the edge call the frame or Break Line (See Figure 2).

　　Forming Dies. There are numerous types of forming display. Some of the most compes are bending, stretching, forting, drawing, coining, extruding, and iReoning.

　　1. Bending. Bending can be defined as a forming operation in which the metal is defermed along a straight axis. Tabs and channels are formeding provide.

　　Exrted under the pad controls how much metal feeds into the die.

　　Oil Pans, Automobile Doors and Fenders, Cookware, and Doorknobs Are Just a Few of the PARTS Manufactured Use Drawing.

　　Created using the coining process.

　　Stretch Flange, The Metal is Susceptible to Splitting.

　　This highly compression plan unifies a well ’s thickness as intecreases the length of a drawn vessel. Its commit and soup count.

　　Then, then

　　In Addition, Die Size Varies Depending on the Production Method in which it is using.

　　Single-strong dis.

　　station cuts and forms the part in a given sequence.

　　of a part -after -ARTH A Single Stroke of the Press (See Figure 4).