"No, they are not all tiny," bibber said.

　　3 microns. "

　　Image Courtesy of Isometric

　　"This is business forour," Bibber Said. "In many of the Cannulas and Sheaths, for Example, that are used in glucose monitoring in diabetes are very long and thin."

　　Do in the Molded PART Is Basical Taking Each Step OF Your PROCES MAP and BREAKING It down to look for Microns.

　　That process map Becomes a living document that the micro molding company used quote all the way through value and product. She explained.

　　One output will be actual shrink, not estimated, she said.

　　"Then, of course, finding out how she can go through that missing prior to build the real mold," She Said.

　　Speaking, BeCAUSE It’s Not All About Melt Flow Rate … But where the rubber hits the road here is melt flow and machingour you have a deforting one. "

　　INSERTION Devices, Bibber Said.

　　"All the things have been many different parts, all kind of squeezed together in a very small space," she said.

　　Terms of Micro Molding and Also in the Automated Assembly FixTure. "

　　to be required at 40,000 to 50,000 PSI of inject Pressure. "

　　Image Courtesy of Isometric

　　"We Think We Found a good way to debunk that one," bibber said. "If that part is heeld into an end-of-sean too …Ve Found is to provice adDitional value is to put it into a system that has exceedly high precision … then we’re solving those yield and quality that are associated with

　　Bibber said it’s pretty common to hear this statement in miniaturization, molded cases but that myth has to one step molded cases fresher, molded cases shing.