USING A DIRECT Lubricant Application System is a Sensible Way to Eliminate Lubricant Waste and to Optimize Lubricant Effectiveness.

　　There are several types of direct Lubricant Application systems. The best one to use in a stamping operations on sectral variables:

　　DIE CLEARANCE

　　Material width and thickness

　　Type of stamping

　　Which Side of the Stock Needs Lubricant

　　Running speed

　　Oil Viscosity

　　Location Needing Lubricant-On the Die, The Stock, or Both

　　Then, then

　　In Roller Coater Systems, A Meterered amount of lubricant is dispense to rolls, which then coiled and coiled material as they rotate (see Figure 1)…….

　　The best applications for roller coating are this that need an event.

　　This option save on lubricant consumption, it also saves on cleaning and disposal costs.

　　Dispensing Heads Are Spring-Loaded Against the Lube Roll. Their faces conform to the lube roll’s curvature to ensure that the lubricant spreads eventned.

　　For transfer dishes and presents, more lubricant can be added as the part progresses doubled the line.

　　Specific Area Such as a Punch or A Drawing Station that Needs Additional Lubricant.

　　addition, you can lubricate intermittently.

　　Die Shapenings.

　　Check value and can be proprammed with existing plcs.

　　Forming Jobs.

　　Blank on demand.

　　of lubricant.

　　Blank-Coating Roller Systems Can Substantially Reduce Lubricant Consumption, Provideo Consistent COVERAGE, and Result in a Cleaner Work Environment.

　　And Safety of a Work Area.