Generally speaking, the new house will have a higher EPC rating than the old house, but this is not absolute.

　　For tenants, it is necessary to know the EPC rating of the house before deciding to rent it. Because this directly affects whether you need to bear more or less energy costs after living in it.

　　The energy cost mentioned here refers to gas and electricity. If you rent a house with a low EPC rating, the warm-keeping effect in winter will usually be poor (that is, it will be cold), so it will naturally take more heating to warm the house.

　　Looking back at the new government regulations, which prohibit landlords from renting houses with EPC rating lower than "E", it naturally means that the "F" and "G" behind it are unqualified.

　　But even if the new regulations are not on the road, Lisa also suggested that the powder should naturally not rent a house with a low EPC rating. Generally speaking, it’s best to choose a house with an EPC rating of "C" or above (even if the government limits it to "E").

　　Another point that needs to be reminded here is: as far as the landlord is concerned, whether you want to rent or sell your house later, you need to conduct an EPC evaluation of the property.

　　EPC not only points out the energy utilization degree and energy cost of the house, but also gives suggestions for improvement (how to save energy and energy cost more).

　　The effective date of an EPC evaluation is 10 years, which means that when your original EPC expires, you need to reapply for a valid EPC.

　　And if landlords want to rent or even sell their own property, but do not apply for EPC, they will face a fine of 200 pounds (residential property) from the government.

　　How can landlords improve the "energy saving score" of rented houses?

　　Landlords can improve EPC rating by improving (installing) related equipment, such as:

　　1. Thermostat boiler

　　2. Thermostat room heater

　　3. External wall insulation system.

　　4. Insulation duct (Duct insulation)

　　5. Roof insulation

　　6. Air source heat pump

　　7. Heating ventilation and air conditioning control (heating ventilation and air conditioning control)

　　8. Hot water taps-efficient

　　9. Install the Secondary glazing.

　　10. Gas condensed boiler (Gas fired condensing boiler)

　　11. Underground floor heating

　　12. windproof (Draught proofing)

　　13. Air cooling (Chiller)

　　14. Water source heat pump

　　It is particularly important to note that if landlords know that the EPC rating of their rented houses is lower than "E", they should take actions to improve it now, instead of waiting until the new regulations come into effect, otherwise they may face fines.

　　Tenants should learn to protect their rights and interests!

　　In addition to the EPC rating mentioned above, Lisa here would like to remind all the shakers that the rented house must meet HHSRS (Health and Safety Standards for Rented Homes).

　　That is to say, landlords must ensure that the property they rent is "not harmful to the physical and mental health or safety of tenants". If it will cause harm, it is not up to standard.

　　And what is the standard of not causing harm? This can be divided into two categories of "harm" factors:

　　1. Affect the "health" of the tenant, such as the following:

　　1) Damp and moldy

　　2) excessive cold

　　3) Too crowded (too many people live)

　　4) Rat pests

　　2. Affect the "safety" of tenants, such as the following:

　　1) Faulty or problematic gas device

　　2) There is fire danger, and there is no fire prevention and fire alarm device.

　　3) Dangerous lines

　　4) The house is not safe against theft, like the door lock is broken.

　　5) structural problems of the house, or poor quality such as stairs and floors (for example, the collapse of stairs will make people inconvenient to walk or even easy to fall)

　　6) holes in the roof, water leakage, etc.

　　Suppose the house you rent is not up to standard, which may cause harm to you. What should you do?

　　First of all, you should inform your landlord immediately and ask them to fix the problem.

　　2. Then, the landlord should give a reply as soon as possible (the law requires the landlord to respond to the tenant within 14 days) and inform the tenant of his reasonable plan for the repair work (such as the time required and when someone will repair it …).

　　At this time, the landlord should not forget that it is necessary to inform the tenant in advance (at least 24 hours ago, but the earlier the better) when he or the relevant workers will come to the rented house for repair work.

　　In addition to respecting the tenant, there is another reason why it is necessary to inform in advance: according to the law, the tenant has the right to enjoy the house rented by him or her quietly, so it can constitute "harassment" for the landlord to enter the rented house without the tenant’s consent.

　　Therefore, even if it is necessary to do repair work, the landlord can’t enter the rental house without notice. In addition, the landlord can only appear in a "reasonable" time.

　　This means that it is totally unreasonable for the landlord to say that he will come to check the equipment of the house and make repairs in the middle of the night, and the tenant can refuse.

　　3. If the landlord has been informed about the repair of the rented house, but the landlord has refused to improve it, then the tenant can "notify the local government".

　　Sha Fen can find out what local government they belong to through the following website: https://www.gov.uk/find-local-council.

　　After informing the local government, they will send someone to the rental house for evaluation.

　　If the evaluation finds that the house does not meet the standard and may cause harm to the health or safety of the tenants, they will take action against the landlord and ask him to improve it.

　　At this time, the landlord usually does not dare to cheat again, and should be obedient. Otherwise, the landlord may be fined or even prosecuted.

　　Another thing that needs to be reminded is that the landlords mentioned above need to be responsible for the repairs, and the tenants do not need to pay for the repairs. So if the landlord comes back to ask you for money, it is illegal.

　　In addition, if the landlord is unwilling to improve these "hazards" in the house, you can also tell them and ask for compensation.

　　Regarding the level of compensation, Lisa Know once wrote an article "500,000 welfare houses are not up to standard, and the government needs to pay compensation according to law", which has a detailed explanation. Interested parties can check it out by themselves.

　　Finally, if you have more questions about renting and selling houses in the UK, you are welcome to contact Lisa Law Firm and Lisa Accounting Firm directly, whether you are a tenant or a landlord.

　　Sweep it, Lisa knows it!

　　(The copyright of this article belongs to Lisa Law Firm. Welcome to forward it. However, any commercial reprinting or quoting directly or indirectly for the purpose of profit must be directly authorized by the company, otherwise the company will strictly investigate all responsibilities.

　　WeChat Official Account

　　

　　

　　

　　We will build molds in the U.S. That Weer Shipped to Asia to Run Parts. As Asia Started Advancing and Making its Own Molds, The Semiconductor Industry in the U.S. Fell Apart

　　AS Manual Wire Bonders, Automation Equipment and Pick-And-Place Machines) for Electronics Manufacturers that Span a Very Broad Customer Base.

　　Then, then

　　Fast Forward to 2013, and we launch into propuction thermost molding services. TODAY, we have first molding presents. NDC Internal Operational ONERENE ROOF WITH NEU Dynamics.

　　

　　Being exposed to the epoxy molding compound.

　　applications.

　　for a Successful Production System.

　　

　　the parting line. The large mold was about 19 x 24 Inches.

　　Cavity but not flash. When a thermoset material hardness, it is extremely hard.

　　Sweep, The Material is pushed into the mold cavities with a very slow and geentle process.

　　

　　Hartsoe: We are a 24-person team who gets to see a lot of first-off stuff. Our Sweet Spot is 600 to 1,000 parts a year. We do a lot of low-volume work.up to 250,000 PARTS. Electronics EncapSuration (or Putting Plastic Around Electronics) Makes up 65% of our work.

　　We are in a unique position to take on work like this before we offer a solution & mdash; we have the mole

　　The u.s. is scheduled to grow 29% a year, year over year, for the next 10 years.

　　We Also Designed and Developed A Mold for An Automotive Customer for A Device that has Resulted in (8) 364 Cavity Molds. This device is an optional light sensor.

　　

　　

　　

　　

　　

　　We Offer Low-to Medium-Volume Contract Theermoset Molding and Our Full Transfer Molding Lab can handle a variety of molding processes and applications.

　　

　　

　　

　　vene manufacturing.

　　

　　SK 3239.110

　　Product description

　　Fan-and-filter units with diagonal fan technology have superior pressure stability and ensure a more constant air throughput. The diagonal direction of outflow ensures more even heat dissipation from the enclosure.

　　Colour

　　RAL 7035

　　Supply includes

　　Complete unit ready to install, including chopped-fibre filter mat

　　Fan

　　Axial, shaded pole motor

　　Air throughput, unimpeded airflow (with chopped-fibre filter)

　　At 50 Hz: 100 m3/hAt 60 Hz: 115 m3/h

　　Air throughput, unimpeded airflow (with pleated filter)

　　At 50 Hz: 110 m3/hAt 60 Hz: 125 m3/h

　　Air throughput with outlet filter including chopped-fibre filter mat (quantity x order number)

　　1 x 3239200: 74/87 m3/h

　　2 x 3239200: 84/98 m3/h

　　Rated operating voltage

　　115 V, 1~, 50 Hz/60 Hz

　　Power consumption Pel

　　At 50 Hz: 19 WAt 60 Hz: 18 W

　　Rated current max.

　　At 50 Hz: 0.24 AAt 60 Hz: 0.22 A

　　Dimensions

　　Width: 204 mmHeight: 204 mm

　　Mounting cut-out

　　Cut-out width: 177 mmCut-out height: 177 mm

　　Installation depth

　　90 mm

　　IP protection category to IEC 60 529

　　IP54 with chopped-fibre filter/pleated filter

　　IP55 with pleated filter and absorber mat

　　IP56 with chopped-fibre filter/pleated filter and hose-proof hood

　　Protection category NEMA

　　Type 12 with chopped-fibre filter/pleated filter

　　Type 3, 3R, 4, 4X with chopped-fibre filter/pleated filter and hose-proof hood

　　Pre-fuse

　　Miniature circuit-breaker/fuse: 2 A

　　Note

　　To increase the air throughput, a pleated filter may optionally be used (see characteristic curve). Suitable for use with fan-and-filter units, roof-mounted fans and outlet filters.

　　With the fan-and-filter unit 3237.XXX, electrical connection is made via two single wires (length approx. 300 mm) on the unit, for all other fan-and-filter units, a screwless spring terminal is used

　　Service life of fans (L10, 40 °C)

　　At 50 Hz: 68,200 hAt 60 Hz: 68,200 h

　　Operating temperature range

　　-15 °C…55 °C

　　Storage temperature range

　　-30 °C…70 °C

　　Noise level

　　At 50 Hz: 46 dB(A)At 60 Hz: 49 dB(A)

　　Packs of

　　1 pc(s).

　　Weight/pack

　　1.04 kg

　　Customs tariff number

　　Eighty-four million one hundred and forty-five thousand nine hundred and fifteen

　　EAN

　　4028177651838

　　ETIM 7.0

　　EC000320

　　ECLASS 8.0

　　Twenty-seven million one hundred and eighty thousand seven hundred and sixteen

　　Product description

　　SK Fan-and-filter unit TopTherm, 100/115 m3/h, 115 V, 1~, 50/60 Hz, WHD: 204 x 204 x 24 mm

　　

　　250

　　Rated Impluse withstand Voltage UIMP (KV)

　　8

　　Model

　　SGM3 DC-250

　　Breaking Capacity Level

　　H

　　Number of point

　　3,4

　　Rated Ultimate Short-Circuit Breaking Capacity LCU (KA)

　　40

　　Rated Current (a) in

　　16,20,25,32,40,50,

　　63,80,100,125,140,

　　160,180,200, 225,250

　　Rated Service Short-Circuit Breaking Capacity LCS (KA)

　　20

　　Rated Operation Voltage UE (V)

　　DC750, DC1000, DC1500

　　Isolation Applicability

　　Yes

　　Standard

　　IEC60947-2

　　Mechanical Endurance

　　Electrical Endurance

　　5000

　　10000

　　Reference testure

　　40oc/50 /c

　　Arcing distance

　　≤50

　　Rated Insulation Voltage UI (V)

　　1000

　　Dimensions China Photovoltaic Molded Circuit Breaker Oem ManuoFacturer 3P 3P

　　

　　

　　

　　"It is our Goal to Retain as a Much of our workforce as postible," Hermiller Said.

　　for another existing facility in the commit.

　　

　　Release.

　　"

　　and robot and vision integration.

　　

　　Scroll Air Compressor Sys

　　Scroll Air Compressor Sys

　　Contact: Liu Jingli

　　Mobile phone: 15359273796 is consistent with the micro signal.

　　Tel: 0592-5580706

　　Less than a year after the release of 400GB microSD cards, this record of maximum capacity will be broken again. The British company Integral Memory announced today that it will officially start selling a 512GB microSD card in February this year. With the extensive promotion of camera equipment, 4K video, 360-degree panoramic shooting and drone shooting are becoming more and more extensive, and these quality changes have also brought users’ demand for higher storage capacity.

　　Integral Memory, a 512GB microSD card, conforms to V10, Class 10 and U1 specifications, which means that it has a minimum continuous writing speed of 10MB/s and a maximum reading and writing speed of 80MB/s, and can support the recording of high-definition videos.

　　In contrast, the 400GB card launched last year has a faster reading and writing speed, reaching a maximum of 100 MB/s.

　　All the devices that support the microSDXC specification are suitable for this memory card, that is to say, it includes not only most mobile phones and tablet devices using Android system, but also sports cameras, drones and even PC products like Surface Pro.

　　With mobile devices now becoming a daily necessity, consumers’ demand for more storage space is very clear.

　　James Danton, manager of Integral Memory Mall, said in the announcement.

　　At the same time, Integral Memory also pointed out that although cloud storage is becoming more and more popular, there is still a great demand for memory cards that can complete mass information transmission in a few seconds.

　　It is reported that the embodiment of this new memory card has passed many inspections, and Integral Memory will provide a five-year warranty.

　　This memory card will be launched in February this year, and the price has not been released yet. However, SanDisk’s 400GB card price last year has now reached $250 (about RMB 1615), and it is estimated that 512GB may be more expensive.

　　PUR Survivor 35 Desalinator/Wat? ermaker NOS

　　Unitek Benchmark Generation 2 Atmospheric Enclosure

　　Toolmex Andrychow TUG-40 Geared Head Gap Bed Lathe (Red

　　Sharp Packaging Max Plus Model 1122 Auto-Bagging Machin

　　Joos HP-S 15 Hot Press (Reduced 3/12)

　　Lot of 100ea PUR Survivor 35 Desalinator/Wat? ermaker NOS

　　Metaplast PB6-CL Flat Belt Puller 5.75" x 44"

　　Electroglas EG5 / 300 ARGOS Wafer Prober (Reduced 3/12)

　　Tenney T20RC-1.5 Environmental Chamber, -73° to 200°C (

　　Davis Standard Versa Cutting System Killion Extruder

　　Glenbrook RTX-Mini Portable X-Ray Inspection System (Re

　　Beacon Medical BPS-7D-580-DCY Scroll Air Compressor Sys

　　Davis Standard Versa Cutting System Killion Extruder

　　Tenney / Lunaire T-40 Environmental Chamber (Reduced 3/

　　Astro-Med Dash 32HF High Frequency Recorder (Reduced 3/

　　Robopac Compacta 960M Horizontal Stretch Wrapping Machi

　　SSEC Evergreen M10 Wafer & Mask Cleaner

　　Bridgeport Series I Milling Machine 2HP (Reduced 3/12)

　　SpectroTest TJF-07 Metal Analyzer (Reduced 3/12)

　　Zeks Heatsink 250HSEA500 Refrigerated Air Dryer System

　　Hankison Catalite 1915 Breathing Air Purifier (Reduced

　　Alzmetall AB3R Drilling Machine (Reduced 3/12)

　　Hull Industries 5A-24 High Capacity Production Console

　　IsoTech Microsphere 4G Compounding Aseptic Isolator Glo

　　Lindgren ETS Series 81 RF Shielded Room 9′ x 7′ x 8′ (R

　　Melton 20L VPail Drum Melter (Reduced 3/12)

　　Perkin Elmer Autosystem Gas Chromatograph (Reduced 3/12

　　Schleuniger HC207 Portable Coaxial Cable Strip Machine

　　HP 89441A Vector Analyzer w/ opt’s 1C2/AY7/AY8/AY9? /AYA/

　　Alloyd 2SC1016 Dual Shuttle Sealer, 10 x 16!

　　Teledyne Combiflash Companion Chromatography System (Re

　　Bio Rad UMA-500 Spectroscopic Microscope, 15x & 4x

　　MEI 709 Die Mounter, w/ StereoZoom 4 Microscope

　　HP/Agilent E9850A VXI Embedded PC Controller

　　HP E4433B opt’s 1E5/UND/UN4/UN5? /UN7

　　Hull Industries 5A-24 High Capacity Production Console

　　Caliper Life Science Tekmar Autotrace SPE Workstation (

　　Weinschel 8852 Frequency Converter (Reduced 3/12)

　　GAM Laser EX10 Excimer Laser System (Reduced 3/12)

　　Panasonic PT-L6600U LCD Projector (Reduced 3/12)

　　Parker Filtration System (Reduced 3/12)

　　GSI ScanArray 3000 Microarray Scanner

　　Empire Pro-Finish FS-2636 3 Piece System!

　　HP 8665A High Performance Synthesized Signal Generator

　　Spellman RHSR60N60 High Voltage Power Supply w/ opt’s

　　Bio-Rad FTS 45 FT-IR Spectrometer w/UMA 300A FTIR

　　Beacon Medical OHT-3TS-80-C101? 102 Reciprocating Air Com

　　Nicolet Model 730 FTIR Spectrometer with AEM Module (Re

　　Mech-El Industries 709 Manual Eutectic Die Attacher

　　Zero Products BNP65-600R&DC Media Blaster w/ Filter

　　Novatech Novadrier N-7 w/ Manual & Hose (Mint Cond.)

　　Blue M POM7-136C-3 Mechanical Convection Oven (Reduced

　　Orbotech VT8000X Inspection Machine (Reduced 2/12)

　　HP/Agilent 8341A Synthesized Sweeper W/ Opts.001,006 (R

　　Metrum MET64SCUAO 4000 Speed (Reduced! )

　　Perkin Elmer Arnel Autosampler

　　HP 89410A Vector Signal Analyzer w/Opt.1C2,AY7,A? Y9,AYA,

　　Thermtec 3 Stack Furnace

　　Mining generally uses large-scale parallel computing hardware for certain accounting. Nowadays, the hot ETH virtual currency is excavated with graphics cards, while the extremely difficult Bitcoin and Litecoin are ASIC mining machines with more powerful computing power. It is rumored that Bitland, the world’s largest mining machine manufacturer, buys 10,000 wafers from TSMC every month to produce ASIC mining machine chips. Recently, South Korean media reported that Samsung Electronics has started to OEM ASIC mining machine chips, and started to OEM this mining chip for a mining equipment manufacturer in China.

　　In fact, bitcoin and Litecoin, which are called the first generation of virtual money, are in the early stage of blockchain technology research, and their mining algorithms are somewhat unreasonable. In most cases, mining is carried out by mindless integer operation of large planning, so the function of fighting ASIC mining machine is very poor. However, the FPGA and ASIC chips developed specifically for the algorithm can complete more robust computing power under a small plan, so the extremely difficult bitcoin and Litecoin are no longer excavated by using graphics cards, and can only be excavated by ASIC mining machines.

　　There are exceptions in everything. A new generation of virtual money, such as ETH Ethereum, has attracted the experience of the previous virtual coin, and made great efforts in the algorithm. Many filled caches can completely invalidate the ASIC mining machine. So now ETH can only rely on graphics cards to explore. Of course, not all new virtual coins can disable ASIC mining machines.

　　SiaCoin is an example of being beaten in the face. The original SC cloud currency can only be excavated by relying on the graphics card, and it is dug together with ETH. As by-products, SC and ETH have always been calm. Not long ago, Bitland suddenly sold the Ant Mining Machine A3, using ASIC chip, which is known as the Blake2b algorithm mining machine. However, it was specially customized for SiaCoin’s algorithm in practice, and its computing power was very small. It is said that after the first batch of goods arrived, A3 mining machine can dig up SiaCoin of $1,100. After the large-scale planning of ASIC mining machine goes online, the income of SC will drop sharply, but the power of using A3 mining machine is still much higher than that of video card excavation, so it can be said that this coin is occupied by ASIC mining machine again.

　　Virtual money basically has the characteristics of PoW workload proof, which means that they need a way to produce coins. The mining algorithm of produced coins has now become the key research policy of many professional mining machinery companies. As long as ASIC chips can be pounded out, the mining machine alone can make a lot of money for these companies, and they don’t have to bear the risk caused by the drastic uncertainty of the currency price.

　　The possession of virtual currency by ASIC mining machine is a great happy event for our general consumers. The power of mining machine is higher than that of video card mining, which means that video card is no longer out of stock and the price will return to normal level. Everyone can buy a satisfactory graphics card, isn’t it Le Taotao?

　　Reliant M15 Elite Fusing Press (Reduced 1/12)

　　Graco C20 Check-Mate CM7A3B P20LCS Pump Package System

　　HP E1426A VXI Digitizing Oscilloscope Module (Reduced 1

　　Barnstead F30420C Tabletop Laboratory Furnace

　　Mitutoyo PH-350A Optical Comparator

　　Amtech Ultraweld 20 Precision Ultrasonic Welder

　　HP 4352B VCO / PLL Signal Analyzer (Reduced! )

　　ABB Raymond 300399 Media Blast System (Reduced 10/11)

　　Blue M Lindberg WSP-109C-MP3 Shock Chamber (Reduced 2/1

　　Applied Systems Eng.167KU 300 Watt TWT (Reduced 2/12)

　　Met One A2432 Manifold Particle Counting System, New

　　Hardinge Horizontal Mill

　　GN Nettest MPA7100 Multichannel Protocol Analyzer (Redu

　　Varian VZH6979G1 TWT Amplifier

　　Stanford Research SR400 Gated Photon Counter

　　Agilent 70420A Phase Noise Test Set w/ opt 001(Reduced

　　I-Tech IFC-4016 Fibre Channel Analysis

　　Wandel & Goltermann RME-5 / RMS-5 System (Reduced! )

　　CyberOptics MicroScan Laser Measure System

　　Leco AP-300 Automatic Grinder/Polishe? r

　　Midas De-Lidder DL-3 Lid Remover

　　IPA-2-400 Wire Stitcher, 2" Capacity

　　Blue M DC-206C Convection Oven

　　HP 8510C opt 010 50 GHz Network Analyzer (Reduced 10/11

　　Power Magnetics Inc 260KVA Transformer (Reduced 1/12)

　　Agilent E1437A VXI Digitizer Module

　　Nikon Linear Measurescope 20 LS-403 Stage

　　Nikon Measurescope 20 LS-402 Stage

　　Mattson Polaris IR-10410 FTIR Spectrometer (Reduced 1/1

　　M&W Flowrite RPC175A Recirculating Cooling System (Redu

　　Air-Hydraulics C-500A 15 Ton Air Over Hydraulic Press (

　　Spirent SRS3452 CDMA Network Emulator

　　HP 8663A Synthesized Signal Generator, 10 KHz to 2560 M

　　ATS 1601 High Temperature 4 Point Extensometer

　　ToolTemp TT-380 Temperature Controller

　　Blue M CSP400A-B-ST350? -HP Processing Oven

　　Metrum MET64SCUA 8000 Speed (Reduced 2/12)

　　Grieve HA-850 Horizontal Air-Flow Oven (Reduced 2/12)

　　Coulter Delsa 440 Particle Counter w/ Power Supply (Red

　　Agilent J1422B Transmitter Module

　　Tektronix TDS3034B Phosphor Oscilloscope w/ Modules (Re

　　Rohde & Schwarz SMY 02 / SMY02 Signal Generator

　　"Upgrade to a SMY43"

　　Comtest G-Strip RF Enclosure

　　Cumberland 284 Pelletizer, Granulator

　　Bruel & Kjaer 4602B w/ 4185 & Accessories (Reduced)

　　Solartron/Schlu? mberger 1253 Gain Phase Analyzer.

　　Uson Testra 1100 Gauge Decay Tester

　　Spirent / Netcom Lan-6201B

　　HP 83420A opts 014 / 210 (Reduced! )

　　Sterling M2B-2712-C Temperature Control Unit

　　CyberOptics MicroScan Laser Measure Unit

　　EMI EMHP 30-600 DC Power Supply 0-30 V / 0-600 A (Reduc

　　Forma Scientific 3908 Reach-In Incubator

　　Micro Robotics Systems Inc Model 170G (Reduced! )

　　Agilent N4484A Mismatch Noise Source

　　Agilent N4486A Remote Receiver Module

　　Spirent TAS 4500C RF Channel Emulator

　　Tektronix VM700A opt’s 01/30/40/48 (Reduced 1/12)

　　HP 8510C Microwave Vector Network Analyzer System (Redu

　　Eubanks 1000 Series I Automatic Wire Stripper w/ Stand

　　HP 4380A 500 MHz S-Parameter Test Set (Reduced! )

　　Blue M WSP-109B-3 Shock Chamber Oven (Reduced 2/12)

　　Agilent J1420B Receiver Module

　　Chase Machine & Engineering Oven Module (Reduced! 10/11

　　Branson 125 Vapor Degreaser

　　Associated Research 7650 Dielectric Tester & High Volta

　　Climet CI-4102 Particle Counter Kit (Reduced 1/12)

　　Dukane Lot of Qty 2 43A240 & Qty 1 Ultra 351 Auto-Trac

　　HP Agilent 83595A Sweeper Plug-In Opt.002

　　Microtrac FRA 9250 Particle Size Analyzer (No Software)

　　Buehler Fibrmet Optical Fiber Polisher

　　CTI Cryogenics-Heli? x SC 350 Cryo Compressor, 45 Hours

　　HP 8566B Spectrum Analyzer System w/ Cables

　　IRD 350 Vibration Analyzer (Reduced! )

　　Westinghouse Type 50K64 50kW RF Generator (Reduced 1/12

　　HP Agilent 8760A K72 Performance Test Matrix (Reduced)

　　Budzar BTU Multi-Zone Electrically HeatedTemp. Unit

　　Millipore Waters Quanta 4000E (Reduced)

　　HP Agilent 5183U Precision Digitizing Oscilloscope

　　Therma-Probe 200 Ion Implant Monitoring System (Reduced

　　LaserMike 183-100

　　Knight Tool Co. KTC-FT-62 Press

　　HP 8753B w/opt 006 Network Analyzer (Reduced 1/12)

　　Micromanipulato? r model 6000 Prober (Very Nice Condition

　　Ideal 3915-95 Guilotine, New, with Accessories

　　U.S. Laser Corporation Model 4037 YAG Laser Trimming Sy

　　Tektronix VM700A opt/s 01/30/40 (Reduced 1/12)

　　Marconi 2851S Digital Communications Analyzer Opts.005

　　Metrum VLDSB Data tape Recorder (Reduced 2/12)

　　Zeiss High-Powered Microscope System (Reduced 2/12)

　　Maag Flockmaschinen SPG 1000 Rise Time Tester (Reduced

　　Koolant Koolers KV2000 Industrial Chiller (Reduced 2/12

　　Agilent 8509B Lightwave Polarization Analyzer (Reduced

　　Agilent E1439A VXI Digitizer Mod. (Reduced! )

　　Thermo Scientific MaxQ 3000 Platform Shaker

　　HP Agilent 83592C Sweeper Plug-In (Reduced 10/11)

　　Patterson Kelley LB-10555 Liquid Solids Blender

　　Orec Model 03DM-100 Ozone Monitor

　　ENI Power Systems OEM-25 RF Generator (Reduced 1/12)

　　Alcatel CIT Crystal 62 Diffusion Pump System w/Alcatel

　　Veeco RG1000 Ionization Guage

　　ZES Zimmer LMG95 Single Phase Precision Power Meter

　　Dukane 410 Series Ultrasonic Welder

　　Beijing Huija Automation Component Counter

　　Despatch LBB2-18-1 Forced Convection Oven, 40° – 204°C

　　Lecroy LC584AM Osciloscope w/ opt’s

　　HP 8146A opt 003 (Reduced)

　　Tektronix GB1400 GigaBert Analyzer w/ Opt’s 08 & 09

　　Standard Environmental Systems STB/1C (Reduced 2/12)

　　HP 8753B w/opt 010 Network Analyzer (Reduced 2/12)

　　C&M 36HD Heavy Duty Baler (Reduced 2/12)

　　HP 35665A Dual Channel FFT Dynamic Signal Analyzer Opts

　　HP/Agilent 8566A Spectrum Analyzer System Calibrated (R

　　Tektronix AWG 2021 Arbitrary Waveform Generator w/ Opti

　　Pelco Model 3 Sputter Coater w/ 91200 Power Supply

　　Tensile Testers, Inc JDH Tensile Strength Tester

　　Schaffner NSG 431 Electrostatic Discharge System

　　Jouan CR 412 Refrigerated Centrifuge

　　HP 8971C Noise Figure Test Set

　　Vickers Hydraulic Pump System w/Thermal Transfer Heat E

　　Seven Associates B-1A Induction Heating Unit

　　Advanced Energy PDW 600 RF Generator

　　HP Agilent 5361A CW Microwave Counter, (Reduced! )

　　Instrument Systems RPA2000 (Reduced! )

　　Seiko D-Tran XM 3064 B11LN Robotic Arm (Reduced 1/12)

　　Spellman RHSR15PN60 High Voltage Power Supply

　　Giga-tronics 6082A opt 130 Synth Sig Gen (Reduced! )

　　Spellman RHR30PM60 / FG / CR / TP/ RVC

　　Union Special 35800 DR Felling Machine (Reduced 1/12)

　　Spirent TAS4500 Flex RF Channel Emulator

　　Spirent TAS5200 RF Converter

　　Knight Tool Co. KTC-FT-54 Press

　　Varian 936-60 Mass Spectrometer Leak Detector (Reduced

　　Molecular Devices Cytosensor Microphysiomete? r

　　Lydall Affinity RAA-002H-BB06C-? BD3 Chiller

　　VWR 1670 Horizontal Air Flow Laboratory Oven

　　Advanced Energy MDX Magnetron Drive 2172

　　GCI DE1AC Air Conensing Chiller

　　Tektronix OT502 E/O Converter

　　Tektronix OR502 O/E Converter

　　Labline 4628 Obrital Shaker

　　Ametek DR833 Cat.No 550643 Rotron Regenerative Blower

　　Alcatel 2063CP+ Vacuum Pump w/SOMER LS100L MOT3 Motor

　　Appleton AH360-188 Explosion-Proof Lighting Fixture

　　HP 8643A Signal Generator Opt. H02 (Reduced 12/11)

　　K&E Vectron Transit Theodolite

　　Tektronix 1502C TDR w/ opt 03 (Reduced 1/12)

　　HP 85101C Network Analyzer

　　Lydall Affinity RAA-002H-BB06C-? CBS Chiller

　　Lydall Affinity RAA-002H-BB06C-? CBC3 Chiller

　　Watson Marlow 604S/R IP555 Peristaltic Pump

　　NoiseCom UFX 7907 Prog. Noise Generator (Reduced! )

　　Tektronix VM700A opt’s 01/40 (Reduced 1/12)

　　Vestil 4853 / Scale Hydrolic Scissor Lift

　　Beckman Multimek 96 Automated Pipettor

　　Astro Med Dash 16u Channel Chart Recorder (Reduced 2/1

　　National Instruments PXI-2532 Crosspoint Matrix (Reduce

　　Wavetek 21117 Noise Figure Test Set w/ opt 01

　　HP 16190A Performance Test Kit, Complete (Reduced 3/12)

　　HP 70842B Error Detector Module w/ Opt H50 (Reduced! )

　　Lot of 240 CITI PLUS II G2P02 Dualband GSM 850 Phones

　　Analogic / Data Precision 3001 AC Power Source

　　Noisecom UFX-BER 892 / 1850 Precision C/N Generator

　　Wavetek 4600 Autocal Amp (Reduced ! )

　　Tektronix SJ300E SDH / SONET Jitter Analyzer (Reduced 1

　　Valhalla 2301 Power Analyzer, 2 Available!

　　ESI 231C

　　Tektronix VM700 Video Test Set w/ opt’s 01 (Reduced 1/1

　　Watson PS2-CB-2 Dual Position Payoff Wire Drawing Machi

　　Agilent J1421A SpectralBER Clock Source

　　Hankison HPRP0.75CU Compressed Air Dryer

　　HP 4277A LCZ Meter

　　HP 70621A 2.9 GHz Preamplifier Module (Reduced! )

　　DLS Test Works DLS400 ADSL Wireline Simulator

　　Ebara / Varian 323-0014 Cryocompressor 2.1

　　LeCroy LC574A 1 FGz DSO w/opt’s!

　　HP 4191A RF Impedance Analyzer

　　TTC Interceptor 1402S Communication Analyser 1/3/5/6/8R

　　HP/Agilent 89411A Network Analyzer Downconverter

　　HP/Agilent 5508A Laser Measurement Display (Reduced 2/1

　　HP 8684B Microwave Signal Generator Opt.002

　　Anritsu MG3670B Modulation Signal Generator w/ opt’s

　　Noise/Com Model UFX-BER 892/1850 Precision CN Generator

　　Rheometrics RSA 2 Solids Dynamic Mechanical Analyzer 70

　　Tektronix 1502B TDR w/opt 03 (Reduced 1/12)

　　JET Equipment & Tools JMD-20VS-1 Drilling / Milling Mac

　　Tektronix TDS520B 500 MHz Oscilloscope (Reduced! )

　　EG&G 1461 Detector Interface / Controller (Reduced 1/12

　　Tektronix A6909 Two Channel Isolator (Reduced 3/12)

　　MetOne A2408-1-115-1 Portable Laser Particle Counter

　　Wayne Kerr 3220A Inductance Analysis System

　　ETS / Lindgren T/T RF Enclosure

　　HP 8757A Scalar Network Analyzer (Reduced 2/12)

　　Perkin Elmer Series 410 Liquid Chromatograph Pump

　　Perkin Elmer Sigma 10 Chromatography Data Station

　　Datatel DCP1210 Equipment Nest w/ Datatel DCP3180 CSU/D

　　HP 16453A Dielectric Material Test Fixture (Reduced 12/

　　LMT Model LD-390 Component Lead Trim

　　Fife Guide P25-1H22A1A Rotary Vacuum Pump w/Leeson Moto

　　Blue M / Lindberg RWB3220A Water Bath

　　JetSat CPI VKU-7820A8 Klystron RF Tube (Reduced 10/11)

　　Anritsu MG3670B Modulation Signal Generator w/ opt’s

　　CTI Cryogenics-Heli? x Cryo-Torr 8 High Vacuum Cryopump w

　　CTI Cryogenics-Heli? x SC 350 Cryo Compressor, 30,000 Hou

　　HP / Agilent 81685A Amplifier Test Set (Reduced 11/11)

　　Wandel & Goltermann RS-100 White Noise Generator

　　National Instruments PXI-8196

　　Vickers Hydraulic Power Unit, 5 Gal Per Minute

　　NHI NHI-2040MW-10L Solid State Amplifier

　　Beckman L5B-CT Ultracentrifuge with Rotor

　　HP 5183T Precision Digitizing Oscilloscope

　　Anelva PRF-153B RF Generator

　　Rapid-Air R34F Stock Reel

　　Spirent SR5059 RF Signal

　　Mystaire 2450 Ductless

　　Spirent TAS5200i IF Converter

　　Lindberg / Blue M Thermo GO1330A-1 Gravity Oven

　　LaserMike 500-02

　　Carpenter 48 Flat Cable Stripper (Reduced 1/12)

　　HP 83470A K71 Lightwave Reference Transmitter

　　LaserMike 60-05-09

　　LaserMike 50-03

　　Weinschel 8310 Series 6268 SmartStep? Attenuator Unit

　　Tek-Temp NRH450 Recirculating Heater with Options

　　Marconi 2305

　　Agilent N4483A Noise Parameter Test Set (Reduced 10/11)

　　Vestil EHLTX-4855-1-39 Hydrolic Scissor Lift

　　HP 83590A Sweep Generator Module, w/ opt 004

　　Quadtech 1870 AC DC Dielectric Analyzer

　　OCE G6035-S Scanner

　　Budzar / Shini BWA-STM-1220-LT? -460 Oil

　　TTC T-Berd 310 Communications Analyzer w/ opt’s

　　HP Agilent 35689B S-Parameter Test Set, 150 MHz

　　Pelton & Crane Validator 10 Autoclave Sterilizer

　　Leybold S16B Trivac Rotary Vane Vacuum Pump w/AEG Motor

　　Watson Marlow Trio Close Coupled Pump

　　HP 54620C Logic Analyzer

　　HP E1431A VXI Digitizer Module 8-Channel, New In Box

　　Plasma-Therm, Inc. PE-1000 AC Plasma Power Source

　　Watson PS2-CB-1 Single Position Payoff (Reduced 2/12)

　　HP Agilent E1413C High-Speed 64-Channel Converter

　　HP 8662A Synthesized Signal Generator (Reduced 3/12)

　　HP E1431A VXI Digitizer Module 8-Ch

　　ENI OEM-650A XL RF Generator

　　Watson Marlow 620RE4 Pump Head w/Nord SK71/4 Motor & No

　　Watson Marlow Trio Close Coupled Pump

　　LeCroy 9354M Digital Oscilloscope w/ opt’s (Reduced 10/

　　HP Agilent 8922M GSM Mobile Station Test Set w/ Opt’s

　　New York Blower Co. 2610A Pressure Blower

　　HP 89605A RF Input and Calibration Modules

　　Tektronix PQA300 Picture Quality Analysis System Comple

　　TTC 2000 Integrated Test Platform w/ TTC 2209 Module (R

　　Continental CMA-202R Aircooled Liquid Chiller (Reduced

　　WaveTek 1395 Arbitrary Waveform Synthesizer

　　HP 11729C Carrier Noise Test Set, 10MHz to 18GHz (Reduc

　　Solartron 7151 Computing Digital Multimeter (Reduced 10

　　HP 83404A Lightwave Source Module

　　NBSC InnOva 2100 Platform Shaker w/ User Manual

　　HP 70900B Local Oscillator Module (Reduced 10/11)

　　GL Communication Inc. 9121TB1G8CE

　　LeCroy 9350AM Digital Oscilloscope w/ Options

　　

　　The most obvious solution here is to remove the door from your media cabinet, but if you’re bent on keeping the appearance of your living room clean, the next best thing is to install a cooling fan.

　　Follow the step-by-step guide and video to install a quiet, temperature-controlled fan that keeps your cabinet cool and your gadgets happy.

　　A cooling fan. I recommend a single or dual thermal-controlled fan, depending on the side of your cabinet. Speed square measuring and leveling tool Masking tape Drill and 1/ 2-inch drill bit Screwdriver Jigsaw Measuring tapeStep 1: Determine and mark where the fan will be placed

　　Placement of the fan will vary depending on your needs. For example, if most of your media equipment is located on the second shelf of your cabinet, you’ll want the fan to be placed parallel to that shelf.

　　Once you decide where you’d like the fan to be installed, mark the center point with a pen. Using the masking tape, create an approximate outline of the fan. Then, center the fan unit over the marked center point and masking tape. Using your speed square (or leveling tool), level the fan, and finally, trace the outline of the fan over the masking tape.

　　The purpose of using masking tape is to prevent the cabinet from chipping. It is not entirely necessary, but I do recommend it as a precaution, especially for those whose cabinets have a melamine finish.

　　Step 2: Cut out a hole for your cooling fan

　　It’s time to bring out the power tools. First, grab your drill and insert a 1/2-inch drill bit. Drill two holes in diagonal corners of the square you traced. This will make the process of sawing the hole a lot easier.

　　Prepare your electrical saw. Carefully saw on (not below! ) the traced lines, using the drilled holes as starting points. Remove the cutout and check to see that the fan fits.

　　At this point, you should clean your cabinet and remove any saw dust.

　　Step 3: Assemble fan and install

　　This process may vary depending on the cooling fan you purchased, so consult the product manual first. If you’re using a Coolerguys cooling fan, attach the fan to the grille and the mounting plate, making sure that the fan is facing the right direction. Then, insert the whole unit into the hole in your cabinet.

　　Using your drill and a 1/16 twist drill bit, drill four shallow holes in the corners of the mounting plate. This will make it easier to insert the screws into your cabinet. Finally, with your screwdriver, insert the screws into the drilled holes to mount the fan to your cabinet. Consult the product manual for the final steps on powering up your fan.

　　

　　

　　In March, Lewis Said, The Covid-19 Pandemic Slowed Negotiation Thermoplastic Injection Molds Processes with CBC INGS. The sale was final.

　　

　　

　　We will eventually, as we win constracts, Add More of the Things We’re Doing in the DEFENSEA.

　　"Anything we can do with plants inject molding, we’re Internet in," he added.

　　Project Xyz May Also Expand Injection Molding Production to "AutomotiveLike Industries" Such as Commercial or Milital AirCraft Lighting, Lewis Said.

　　

　　At the July 6 Ribbon-Cutting, Lewis Said He Grew Up Just Four Miles from the Muscle Thermoplastic Injection Molds Shoals Facility.

　　

　　Cartridge heaters are used for heating metal parts and can also be fitted with threaded bushings for liquid heating for certain applications. Cartridge heaters will reach metal temperatures of up to 1,400oF (760oC) with the appropriate material, watt density, and fit selections (see Figure 2 on our catalog page 7.2).

　　Get a quote on a cartridge heater today. WATTCO also manufactures other industrial heating products such as infrared heaters, immersion heaters, pipe heaters and more. Click here to view all of our products.