With the strong support by domestic and international associations and media and all the staff’ s effort, GWHE goes smoothly. You can see from the following three aspects:

　　1/ Media Profile:

　　More than 200 organizations and associations support GWHE, which are from China, America, India, Malaysia, Germany, Span, Pakistan, South Africa, England, Korea, Singapore,Canada, Nigeria and so on.

　　Featured Media:

　　International Solar Energy Society

　　ERA Solar Magazine

　　2/ Exhibitor Profile:

　　Over 90 enterprises have become our exhibitors, such as Haier, ISES, Rheem, etc.

　　Exhibiting products:

　　Heat pump product and equipment

　　Solar water heating equipment

　　Electric water heater

　　Gas water heater

　　Related accessories and equipment, water management system, hot water solution, energy-saving hot water project, etc.

　　3/ Visitor Profile:

　　About 1500 domestic and 120 overseas companies have registered to visit GWHE2012.

　　According to the statistics, 71% of them are interested in solar and heat pump water heater, 20% would like to purchase electric water heater and gas water heater, and others want to see water purification system, boiler, and latest hot water solution.

　　More good news is updating!

　　If you want to be exhibitor or visitor of GWHE2012, please feel free to contact us.

　　Best regards

　　Jacob Kong

　　GWHE 2012 Organizing Committee

　　Mobile: + 86 13416279371

　　Fax: +86 20 82579220

　　Email: Marketing4@grandeurhk.com

　　Web: http://www.whstgz.com

　　

　　Articles from: ID Tribe (ID:ID-Tribe) and General Design Studio.

　　Recently, the results of the German Red DotDesign Award)2017 were announced. The work "FOLDABLE ELECTRIC SCOOTER" by students such as Zhang Bowen and Mu Tong, a general design studio, stood out from nearly 5,000 works in the world under the guidance of Wu Qun, and won a place in the award rate of 6%.

　　It took three months from the creative conception to the final design. After several rounds of brainstorming, the team finally decided to submit "FOLDABLE ELECTRIC SCOOTER" to the Red Dot Award.

　　FOLDABLE ELECTRIC SCOOTER

　　This product is an electric one-wheel gravity-sensing scooter, inspired by the hot electric scooter now, combined with the cool shape of skateboard, specially designed for challengers who love extreme sports. The simple shape is loved by young people, and the carbon fiber car shell is stronger and lighter. Intelligent, convenient and easy to fold, which is convenient for people to use.

　　The General Design Studio is composed of a group of fresh meat and flower designers who are imaginative and meticulous in their work. There are often tutors from off-campus enterprises, outstanding seniors and professors from Zhejiang University for guidance. In recent years, it has also won dozens of awards, such as the Gold Award in China Hardware Products Industrial Design Competition, the Silver Award in Zhenhai Cup International Industrial Design Competition, the Supreme Gold Award in Zhang Sanfeng International Industrial Design Competition and the Silver Award in Taizhou Cup International Industrial Design Competition.

　　▼

　　Editor in charge:

　　

　　With a distinguishing feature: the question of its finish products, the company has grown and played a leading position in the market over the year.

　　

　　

　　MOLD TOLD PLASTICSTODODAY.

　　MMD CEO TIM Holland.

　　Expanded Design Capabilities

　　Effective from a manUfacturing Perspective, YET TRUE to the Intent of the Part. "" "" "" "" ""

　　Currently, 20% of the Company’s Business is for Medical Customers. MMD Serves Many U.S. Fortune 500 Medical Device Most of the Top Medical Device Companies in the MHERETAT MHERETARERERERERERERERESIations

　　A new facility in Brooklyn Park, mn has been has the capacity to emblay 250 people "and we fully intend to ramp up to supacity over the next foot years," Holland Saled.

　　

　　

　　A Major Expansion is Ready for

　　Cleanroom Molding.

MMD Secured A $ 500,000 Low-Interest Loan Through the Minnesota Investment Fund and $ 600,000 in Local Assistance Through Jobs Bill Legislation.

　　Components specializing in BI-POLAR PLATES for the Fuel Cell Stack, Printer Components, Custom Plastic Containers and thermoseting MOLD MANUFACTURERS Enclosures.

　　

　　500)this.width=500′ align=’center’ hspace=10 vspace=10 rel=’nofollow’/>

　　(Source: Magna)

　　Brian Krull, global creative director of Magna’s exterior decoration department, said: "Through this technology, we are equivalent to handing designers and engineers a brush to make a design that adapts to the current vehicle, or redesigning directly on a blank and customizable surface to redefine the brand for future electric vehicles and self-driving cars."

　　Magna Mezzo Panel uses hidden-till-lit lighting, so its surface looks very clean and smooth before lighting is activated, thus providing innovative lighting options. The new Mezzo Panel also has an animated lighting space for conveying vehicle intention and status alarm, and active aerodynamic technology can be added to improve vehicle mileage, while having a futuristic appearance.

　　In the future, the technology may also use sustainable materials, such as environmentally friendly plastics, coatings and films, to further promote the sustainable development of automobile manufacturers. And sustainable materials can transmit signals, thus achieving seamless integration of ADAS sensors.

　　Krull said: "Mezzo Panel has unlimited possibilities. We look forward to working with our customers to help them achieve zero emissions through this technology. "

　　

　　Notice of work contact

　　Guo ban Han 1997 No.62

　　People’s governments of all provinces, autonomous regions and municipalities directly under the Central Government, ministries and commissions and institutions directly under the State Council:

　　In recent years, the supervision and inspection of the government system (hereinafter referred to as "supervision") has been strongly strengthened with the great attention and support of local governments and leaders of various departments in the State Council. At present, most regions and departments have instructed specific units and full-time personnel to undertake the work, which has played an important role in ensuring the smooth development of the inspection work. In order to further improve the supervision work and promote the implementation of the important work arrangements in the State Council, the General Office of the State Council decided to strengthen the supervision work with all regions and departments. The relevant matters are hereby notified as follows:

　　First, the supervision work contact content. First, the major decisions and important work arrangements made by the State Council, as well as the matters that need to be reported by various regions and departments in the official documents of the general offices of the State Council and the State Council; Second, the matters that need to be implemented in the decision of the the State Council meeting; Third, the matters that need to be investigated and implemented in the on-site instructions of the State Council leaders and reported to the leading comrades; Fourth, other matters assigned by the general offices of the State Council and the State Council that need to be supervised by various regions and departments.

　　Second, the contact form of supervision work. The General Office of the State Council is responsible for supervising the implementation of the official documents of the State Council and the State Council, the decisions of the the State Council meeting and the instructions of the leading comrades of the State Council. Where the official documents and meetings of the general offices of the State Council and the State Council have clear time limit requirements for implementation, the general office of the State Council will report to the relevant regions and departments as required, and assist the regions and departments to do a good job in the feedback of inspection results and promote the implementation of decision-making; With regard to the instructions of the leading comrades of the State Council transferred to the relevant regions and departments, the General Office of the State Council will take the initiative to negotiate with the regions and departments for investigation, and promptly report the investigation results. For important matters or long-delayed issues, the General Office of the State Council will directly organize supervision with the host area and relevant departments when necessary to promote the solution of the problem.

　　Three, the inspection work contact channels. The State Council General Office and local governments and the State Council departments should establish normal contact channels for inspection work, strengthen regular contact, cooperate closely, coordinate well, and form a convenient, smooth and effective inspection organization network. The General Office of the State Council designated the Secretariat Bureau to undertake the daily work of the General Office of the State Council. Responsible for the organization and coordination of matters that need to be supervised and inspected in the State Council, and contact with units responsible for supervision work in various regions and departments. All localities and departments should also designate relevant units to undertake the daily work of supervision, and keep in touch with the General Office of the State Council. Please all regions and departments in February 10, 1998 will be responsible for the supervision of the name of the organization, the name of the person in charge and contact telephone number to the Secretariat of the General Office of the State Council.

　　the General Office of the State Council

　　December 17, 1997

　　

　　, Meeting the needs of your schedule.

　　

　　Are M1 Pro and M1 Max chips as strong as Apple official website said? How big is the mini-LED screen? Let’s take a look.

　　Due to the excellent power control of M1 chip at that time, everyone seems to have a thin and powerful fantasy about the new Pro, but Apple is also telling everyone with facts that thinness and performance cannot be perfect.

　　The brand-new MacBook Pro 16 and the old MacBook Pro 16 are placed together, with a full thickness of an upper cover, about two one-dollar coins. At the same time, because the middle of the old fuselage is the thickest, there is a micro-arc design from the Apple LOGO to the surrounding, which seems to give people a lighter feeling.

　　The new hard copy G4, with complete graphic design, will have a stronger sense of weight visually.

　　Although the weight has only increased by 100g compared with the old model, it is really heavy. There is no waste of thickening space around the fuselage, and the fear of being dominated by four interfaces and adapters can finally end.

　　Full-size HDMI, SD card slots are back, and even MagSafe. It seems that Apple wants to tell users from the appearance to the interface that this time our function is greater than everything.

　　On the core processor, the new MacBook Pro has M1 Pro and M1 Max to choose from, from 14999 to 45999, and there are different CPU and GPU cores and different memory capacities to choose from.

　　So how much is the actual performance improved compared with M1? Can it replace the old 16-inch i9 processor? We also pull all these, and compete with the bloody version of M1 Pro and Max.

　　According to the tests of GeekBench 5 and CineBench, the CPU performance of the two new processors is the same, and the single-core performance is at the same level as that of M1.

　　M1 is a combination of 8 cores, 4 performance and 4 energy efficiency, while M1 Pro and Max are a combination of 10 cores, 8 performance and 2 energy efficiency. Therefore, the multi-core performance is improved by about 80% at most. Compared with the old 16-inch i9, the single-core performance is improved by about 68% and the multi-core performance is improved by about 94%.

　　M1 family has surpassed the old 16-inch i9 in CPU performance, and the arrival of Pro and Max has widened the gap.

　　However, because our old 16-inch model is still the i9 of the 9th generation, the result may be biased towards Intel, so we found a microsatellite with i9-11980HK processor. After the same running test, it is found that the performance of the 11th generation i9 is better than that of M1 chip in CPU single-core and multi-core, and it has been equivalent to M1 Pro and M1 Max under the long-term and high-load CineBench test.

　　Of course, running scores can’t determine everything, so we asked the later teacher to bring a C4D model for rendering and record the rendering time. This job is mainly to test CPU performance. From the results: M1 Max is the fastest, followed by M1Pro, MSI is the third, M1 is the fourth, and the old 16-inch i9 is the bottom.

　　Seeing this, do you think that M1 is still very strong, and the promotion of M1Pro and M1 Max doesn’t look great? But don’t forget that M-series chips are SoC, in which CPU, GPU and neural network engine are all integrated and share the running memory. This time, the upper limit of memory has been increased from 16GB in M1 to 64GB in M1 Max, which is fourfold, so we can’t just look at CPU.

　　In terms of GPU, through the OpenCL test of GeekBench5, it can be seen that M1, M1Pro and M1 Max have directly opened three gears due to the different number of cores, which is up to 200% compared with M1 chip.

　　The old 16-inch model equipped with AMDRadeon Pro 5500M performed better than M1 Pro, while the MSI equipped with RTX 3080 ran more than 110,000 points.

　　In the GFXBench Aztec Ruins test, which simulates the actual ability more, M series chips still have three gears, the frame rate of the old 16-inch 5500M is about 20% higher than that of M1, and the MSI 3080 is between M1 Pro and Max, with a difference of about 50% from top to bottom.

　　We selected an HDR material after editing and put it in FinalCut for rendering and comparison.

　　Whether it is H264 4K or HEVC 4K Dolby Vision, M1 Max is the fastest. Compared with the old 16-inch model, the new MacBook Pro has more advantages in both codes.

　　At the same time, we found that the newly added media processing engines of M1 Pro and Max play a very important role. In this actual scene, the rendering time of M1 and Max has doubled, and the gap between 18 seconds and 28 minutes is worth it for video workers.

　　This newly added engine has completely solved the problem that M1 chip is unfriendly to H.264 support.

　　Similarly, in order to compare it with MSI again, we found the regular material of the evaluation program of Huangjia, which we usually watch, and pulled it into Pr for rendering test, but we don’t need to render it yet. Obviously, M1 Pro and Max won’t get stuck in the timeline preview, and the old 16-inch model will have to wait for 2-3 seconds, while MSI will get stuck.

　　From the final result, the ability of MSI is also between M1 Max and M1 Pro in the actual video rendering work, which is also in line with the running expectation.

　　Generally speaking, the absolute performance, M1 Max is greater than the 11th generation i9+3080, M1 Pro is greater than the old 16-inch i9 is greater than M1. Of course, at present, M1 is sufficient for most people’s needs of Word, PPT, chatting and surfing the Internet.

　　The extra performance of M1 Max and M1 Pro is concentrated in graphics and codec ability, which is a very small range of productivity and only applies to specific people, so don’t panic for those who hold M1. These improvements are not aimed at you, and you are still a MacBook Pro.

　　So far, the performance improvement of M1 Pro and M1 Max is obvious, and it can be said that they can be put in their own ecology and thrown into the whole big market, and their performance is also the flagship level, but we want to tell you that from the practical experience level, M1 Pro and M1 Max are absolutely unique.

　　The first one I didn’t expect was the same as the MBP of M1. In the previous test scenario, it didn’t start 90% of the time, and even if it started, it was very quiet. In the indoor environment where the same C4D 4K material was rendered, the noise it brought was not worth mentioning compared with the old 16-inch and MSI.

　　The second thing I didn’t expect was that M1 Pro and M1Max still kept the same power control as before, and there was little difference in performance between power supply and battery supply. The material was rendered at the same time, and the power consumption only dropped by 1%; Although the old 16-inch can also be fully powered by batteries, the power directly dropped by 21%; MSI was 3 minutes slow and the power dropped by 29%.

　　This kind of experience improvement can be said to be epoch-making for notebook products that locate mobile productivity. Apple used its own chips to bring the power consumption and performance experience of the mobile terminal that the original iPhone and iPad had to the notebook.

　　That is, if we can continue to maintain a thin body and let the mobile characteristics continue to enlarge on this basis, that may be the final appearance of mobile productivity, and we are very much looking forward to how Apple will iterate in the future.

　　hardware

　　Since its own chips, and the entire macOS ecosystem, the technology tree has given the ability to create videos and graphics, and Apple, which has always paid attention to the combination of software and hardware, has naturally given a more top-level screen in the new MacBook Pro. However, everyone is definitely more interested in this bangs. This bangs are so big that they have to have a face ID just for the camera. And the shape is more prominent than the bangs of the iPhone.

　　In other areas, the upgrade is still very authentic. The R angle above the screen is the same as that of the fuselage, and the black edge of the screen is equal in width, which improves the visual perception a lot.

　　On this screen, which is much larger than the mobile phone, bangs will not affect the use too much. When reading the content, the line of sight is basically invisible. In the full-screen state, bangs and the status bar can be hidden together. Just like the demonstration at the press conference, the content will be more immersed without seeing it at all.

　　The camera has also been replaced with a larger sensor because of the existence of the bangs area, and the video call effect has improved a lot.

　　However, the cursor that everyone cares about will indeed be lost here, hidden behind the bangs, and will also occupy the status bar space. The displayed icons are not as 16 inches as the old ones.

　　This time, the screen material is made of mini-LED, which directly brings the global brightness performance of 1000nit and the peak brightness of 1600nit. After the test of our actual brightness meter, when displaying photos with high dynamic range, the highlight exceeds 1600nit, which is obviously improved compared with the old model.

　　Moreover, according to the naked eye, the details of the old bright part have all been lost, and the sky has become all white. After using it for a weekend, you can obviously feel the improvement of screen brightness every day.

　　With the addition of ProMotion, all kinds of sliding gestures and application zooming are smoother than before, and the system experience is smoother, which is a much stronger improvement than screen contrast.

　　Apple also provides several fixed frame rates to choose from to meet the special needs of creators.

　　At the same time, in the display option, for users who don’t need it, you can also turn off the XDR display and reduce the peak brightness to 500nit, which can also bring stronger endurance performance in theory. It can be said that while giving top-level hardware, it also gives a wealth of customization options. As I said at the beginning, this machine is dedicated to the creator and the function is supreme. The keyboard area at the bottom of the screen is directly removed from the Touch Bar.

　　The overall feeling of the keyboard is between the keyboard of the new iMac and the old 16-inch keyboard. Compared with the new iMac, the keyboard stroke is slightly shorter, but the feedback is stronger. Moreover, the keyboard area is designed in black, which looks very cool. At the same time, the white key characters will indeed look clearer.

　　On both sides are the newly designed speaker system, which supports spatial audio like the new iMac.

　　Let’s compare it directly with the previous generation.

　　(Please move to the video for 10 minutes and 55 seconds)

　　The new MacBook Pro comes standard with a 140W charger. The adapter is not small, but it can be seen that Apple is trying its best to control it.

　　MagSafe braided wire comes standard, and it can be directly attached to the computer for charging. However, this time, MagSafe is too tight, especially for sucking, and it can’t be pulled down at all. It needs to be disconnected easily from another angle, but it loses its original function of preventing cables from dragging the machine.

　　At the same time, after practical test, MagSafe can support 140W input, but it can only be charged with C port from the same power supply. Due to the interface limitation, the maximum input can only be 96 W. Friends who want to experience 30 minutes of fast charging on the 16-inch still need to bring MagSafe connecting cable.

　　summary

　　After the real test, I found that I could see official website’s complicated customization options more clearly. Compared with the original selection of Core chips, M1 Pro and M1 Max are more like math problems, basically, doubling the number of cores means doubling the corresponding performance, and losing two cores means 20% less, so you can take our test as a benchmark and choose according to your actual work situation, so you don’t have to worry about the number of cores.

　　For two brand-new chips, the performance of M1 Pro has surpassed that of the old 16-inch i9. For what we call the productivity of creative people in a smaller range, it is sufficient in most cases, while the performance of M1 Max is really the best, belonging to a smaller group of master users.

　　If you recommend it rationally, if you want to buy a MacBook Pro that suits you, you must consider whether you are in that productivity range, and at the same time consider to what extent you are a user, so as to choose between M1 Pro and M1 Max.

　　If you are an ordinary user who doesn’t have high-coding materials even when editing films at ordinary times, it is enough to choose M1 properly.

　　The performance of the first product of Apple’s chip transfer plan in the second year can be said to prove that Apple is extremely serious and fully prepared to do this. It can even be seen that in order to ensure the success of platform migration, the new MacBook Pro is a bit different from Apple.

　　For the most stable platform experience, there is no further exploration in industrial design; Controversial designs such as Thunderbolt interface and Touch Bar have also chosen to return to users.

　　Putting the actual needs and functions before Apple’s insistence is only to win professional users who are still hesitant about platform migration as soon as possible. This may not be your final fantasy about MacBook Pro, but it is the most suitable choice for current Apple and professional users.

　　

　　

　　

　　

　　Removal from parts in post product.

　　

　　

　　US to transform 3D Printing from a Batch Process to a Continuous Process that Will Work Much Better in a Volume Production Setting. "" "" "" "" "" "" "".

　　

　　get the right part price, automated material handling is critical.

　　of next-Generation, high throughput additive systems.

　　Rapidly. Automated depowDering Also Enables the Machine to Remove Loose Powder Around PARTS Without the Need for Operator Involution.

　　a card, lifts the build box from the printer and transfers it to the next stage in the product process. In the nearfuture, the cartiLL be replaced by agv, a conveyor or a good,

　　steps need to be carried out.

　　Manual Labor that is required to design and product the party parts.

　　Tedious Human Labor.

　　

　　

　　When the means of propuction is more automated. "

　　ManuFacture and Assembly Approach that you would with any other problem.

　　Automation Will Expand the Reach of Additive Manufacturing, Enabling It to be used for less leptimized designs or simpler parts.

　　

　　. "If they’re using tractitional manuFacturing Methods to Produce Those Parts, it is going to be a problem.

　　"

　　a key root in their business plans.

　　"To Scale, The Results Require Some Level of Automation to Give A Predictable and Repening Result End-TO-End.

　　

　　Post-processing. This Limits How Effectively You Can Scale. "

　　be dialed in and controlled.

　　HOOD of a Car. "

　　

　　by Removing Trays and Washing parts. "

　　"Project Skywalker" initiative. The Goal is to harness automation to the count-effectively handle large product.

　　TAKING on Such A Massive and Deeply Entrenched Industry Such As Injection Molding, Automation Is Going to Be Our Primary Weapon. "

　　And inspecting parts.

　　Stage.

　　Ability to scale operations. "

　　Processing. "

　　Steps with the Highest Concentration of Labor Include Part University.

　　

　　Parts can be removed, new material loaded and the printer starts the next cycle.

　　

　　Includes processes related to surger finish, such as painting, machining and sanding.

　　Than removing the support. A high-volume automotive interior part may request a better finish, beCAUSE FIT, finish and cosmetic app, be taken into consature.

　　

　　It ’s imageant that future Automation Solutions Break the Bottlenecks Related to Post-Processing and Material Movement. Tasks Must Be Broken Appriodory THROUGEGIMETFAMEFTFARTHEGE Througel.

　　

　　, But the Can Still Alleviate A Lot of Indirect Labor Needed to Keep Machines Fed with Raw Material.

　　Can make parts that are then removed from their fixture and are ready for the next proces image. ""

　　Quality ControlCording to Larussa, Quality Control is one of the most challenging aspects of additive management automation.

　　Then, then

　　

　　Larussa Points Out.

　　

　　, Which Takes Time and Limits Geometry.

　　Issue in all Powder-based processes.

　　

　　Intelligence (AI). "."

　　predict and fix proplems beface they happen.

　　

　　

　　

　　Robots to the Rescueincreased Use of Robotics Promises to Reduce Variation, Improve Consisteency and Boost Throughput.

　　economic sense.

　　, so rapid redeployment is essential.

　　"Collaboative Robots are a perfect solution, Becaue Operators can be in and design machnes as needed having to shut down for changeover," Claims Campbell.

　　Loading and Unloading Build Plates) A Cluster of more than printers at its factory in Brooklyn.

　　In Germany, Engineers at DAIMLER AG Recently Developed An Integrated Process Cell that Features Six-AXIS FANUC and KUKA ROBOTS, in Addition to Grenzebach Agvs.

　　

　　"Robots are used to automate downream propuction processes," Explains Eichler. "All TranSport, Placement and Removal Activities in the Post-Processing Are Done By Robot By Robot By Robot By Robot By Roboting By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robot By Robott

　　Purposes. Finally, the build platform is conneging to a saw, which sections the parts from the platform, making the components ready for further use. "

　　an extra degree of motion.

　　

　　

　　and post-processing applications. "

　　

　　Integrating that equipment as part of regular workflow. "

　　For example, Brose Recently Invested in a German Startup Company Called AIM3D, Which is Developing Machines Such as the Exam 255 EQUIPPED With Material Feeders.

　　"" It made that the general "time to print,"

　　An Automatic Material Feeder and Can Take up to 1 Liter of Material Per Extruder. The Material Hopper Can Alo Refilled During the Printing Procles.

　　

　　

　　3Dque Also Recently Developed A Module Called Opod that features internal Conveyors and Collection Bins, Enability "TRULY AUTONOMOUS FABRICATION of Plastic Parts."

　　Process.

　　

　　

　　

　　

　　Process and sending it double for post-processing, saving significant time and money.

　　"This [Machine] Will Contribute Significantly to Increased Automation Possibilities and Reduction of Build Platers Costs," Claims Turner.

　　

　　

　　

　　To proprint metal parts at scale.

　　Volume Applications.

　　

　　Stepping Stone on the Road to Print Runs of 1 Million, Followed by the Next Threshold of 10 Million. "

　　Fast Radius Recently Became One of the First Companies in the World To USE The Production System.

　　, Low-AlLoy Stees, Titanium and Tool Steels. It also boasts the speed, question and count-point to compete with the tracking process. ""