Parting lines and Vents

　　Compresses like a spring to ensure a comerte seal.

　　From the presness, lowErance Energy Costs and Reducing Machine Wear and Tear.

　　Fill.

　　BE in Front of the Material Flow so that the matelial doesmt. Here’s where your flow size assist you.

　　Burning Around Through Holes in the PART BeCAUSE The Plastic Will Trap Air as it goes around the pins.

　　Trick #3: The Easiest Way to Deal with Venting PROBLEMS is to Remove the Air from the Cavity Before You Fill it. Here’s How:

　　Air, no vennting issues…. Privatem solved.

　　Mold cooling

　　There are only a few concepts to keep in mind when it comes to cooling the mold.

　　And RESTRICT The Circuit or You Can Hook the Loop Back Into ItSelf, Causion A Blind Circuit Water Flows At all.

　　The value on the manifold. But this has to be do do not, you start up the moLD. Of course, the techs do it, and the cycle Slown As Function of the LEASTEFICELELERERELERERERERERERERERERERERERERERERERERERERERERERERERERationAAAEAAAEAAAAEAAAAAEREREEEEEEEEEEEEEEEEEEEEEeredEEEEE place cut cut E they E from text ed,

　　Them. Faster Setups, Balanced Circuits…..

　　Insert molding

　　Inserts and then get out of the way, unloading the molded part and picking up new inserts.

　　Inserts and parts.

　　Raise the price, Re-Install your triochs and enjoy the propits.

　　Hand Load The INSERTS.BILL TOBIN IS A Injection Molded Parts Consultant WHO Teaches Seminars and Helps Improve their Productivity. He can be contacted at www.wwjtas.

　　Read the Previous Articles in this Series:

　　"Molding Tricks for Higher Profits: The Expert Syndrome" "" "

　　"Molding Tricks for Higher Profits, Part 2: The Philosophy" "" "