Time, RAMP TIMES and Velocities. Unofortunately This Complicates inject Molding Processing, and in my opinion class options are highly derimenental for consistentent porta.

　　Machine Manufactuers are eager to come up with more sophisticated processing mode.

　　Possible Variations Within Second Stage Between Different Machines:

　　Pressure for 8 sec. SEE FIGURE 1.

　　Hold-Pressure Responsence

　　a graphic plot of the plastic presure vs. time.

　　The set pressure, no time at the set pressure. See Fig. 3 for a Graphic Plot of Plastic Pressure vs. Time.

　　"Not times at a set presure. See Fig. 4 for a Graphic Plot of Plastic Pressure vs. Time.

　　/Sec for the Second Hold-VELOCITY Stage.

　　sec. See Fig. 5 for a Graphical plot of presseres vs. time.

　　. 6 for a graphical plot of presus vs. time.

　　(Pressure Limited) and the Machine Holds A Constant 10,000 PSI for Whatever Time Remains of the 3 SEC.

Pressure in Red, Cavity Pressure in Green; (Scales Not Identical). As can be seen my Attempts to gain Process consisteency, after market, we not successful.

　　And FASTER Computers Available, Programmers with Good Intents are adjing features & mdash; Packing Velocity as an exmple & mdash; that hinder propuctsisister.

　　With second-stage (Pack or Hold) Velocity Control, It is Best to Have Cavity-Pressure Sensing.