Temperature regulators can  be self-actuated or externally actuated. Self-actuating temperature regulators are self-contained without the need for an e xternal power source. They use thermally sensitive material that expands and contracts with temperature changes. The expanding and contracting results in movement of the actuator to adjust the valve position and change the flow path of the thermal fluid to the heating element. This mechanical actuation design results in excellent temperature control where the setpoint does not need frequent changes and is a more affordable way to effectively control temperature. Self-actuated temperature regulat ors are also called self-operated temperature regulators.

　　

　　Externally actuated temperature control valves are often used as part of a more complex control system with an external temperature sensor and a Propor tional-Integral-Derivative (PID) controller. They require an external power source for actuation. In a typical system, the PID controller is given a set point and gets feedback from the temperature sensor at the controlled point in the process. The PID controller compar es the set point temperature to the process temperature from the sensor. An electronic or pneumatic signal is sent from the PID controller to the tempe rature control valve to adjust the valve position to keep the process at the temperature setpoint. This type of valve is used when frequent temperature set points are required for automation.

　　The Jordan Valve Mark 80 Series is completely self-operated and requires no external power source or other expensive instrumentation to operate the val ve. The actuator is connected to a sensing bulb by a capillary system that is filled with a volatile fluid that, when heated, begins to vaporize creating pressure in the system that works on the diaphragm to either open (reverse acting) or close (direct acting) the valve. A great deal of research has gone into the development of Mark 80 seal welded actuator (SWA) to provide the most precise control. Combined with the Jordan Valve sliding gate valve technology, the Mark 80 temperature regulator delivers excellent control. If the set point needs modifying, it is field adjustable, and the temperature range can be changed without taking the valve out of the line.

　　The Jordan Valve Temperature Regulator Series offers different configurations of self-operated temperature regulators for higher flows, fail open or close settings, tracing lines and pilot operation.