Thermoset Transfer Molding Falls Between Thermoset Compression Molding and Thermoset Injection Molding, and it shares something of each:

　　

　　A Preheated Preform is Placed in a Compression Chamber, Called the Well, or the Pot.

　　As the transfer plunder closes, The Preform is Compressed and Starts to Flow

　　Now the transfer pluner acts as a ram to force the hotel, flowing resin into the mold

　　The Filled, Heated Mold is Heeld Shut UNTIL The Resin CURES …

　　How Transfer Molding Works

　　The Resin to Flow Throughout The Cavity Until It Completely Fills The Now-CLOSED MOLD MOLD MOLD MOLD MOLD MOLD and Assumes of the Finished PART.

　　Hardness and Rigidity.

　　The part at its maximum cross section, the longer the curing time required for a given mold testure.

　　. ""

　　Preforming

　　

　　Direct Charging

　　

　　Inserts

　　

　　Can be epoxied in as a secondary operation.

　　Thermoset compression molding:

　　Advantages and Disadvantages

　　Rival this of Custom Injection Molding.

Thermoseting mONUFACTURERS on the Plus Side …