Let us now examine the functionals of an inition mold.

　　Image Courtesy of Michael Paloian/Shutterstock

　　Platen and the core size is class to the moveable workn.

　　Image Courtesy of Michael Paloian/Shutterstock

　　Figure 2. Inject Mold MOUNTED in the Inject Molding Machine.

Must decide where and how to die is this isSee. Let us exmine a feew exmples.

　　Image Courtesy of Michael Paloian

　　Figure 3. Gate Centrally Located Inside a Battery Pocket, Which Eventually Will Be Hidden with A Removable Cover.

APPEARANCE.

　　Image Courtesy of Michael Paloian

　　Figure 4. Edge Gate Located Along One Edge of a Cover.

Post-machined to forelly.

　　Images Courtesy of Michael Paloian

　　FIGURE 5. Gates Located Within Open Features.

Otherwise, The Remaining Material Could Interfere With Mating Parts or Be Cosmetically UnaccedPtable.

　　Images Courtesy of Michael Paloian

　　Figure 6. Gate Mark Marking Also Be Covered by Another part, as Shown in this exmample. The handle covered the gustigial, Thus Eliminating Cost-Molding Machining Operations.

Gate Remnants are often covered by another part, as Shown Above, or by labels. If a label is applied, you want to be sure like the solidation so the labels.

　　Image Courtesy of Michael Paloian/Shutterstock

　　Figure inject Molded Parts 7. Reverse ejection.

Of the type of gate and its general local location basid on the reasons previously.

　　This concludes this first installment of a multipart server secticated to designing parts for injection molding.

　　About the author